Hybrid Excited Permanent Magnet Motor: Analytical Sizing, Finite Element Analysis and Tests

被引:6
|
作者
Cinti, Luca [1 ]
Michieletto, Daniele [1 ]
Bianchi, Nicola [1 ]
Bertoluzzo, Manuele [1 ]
机构
[1] Padova Univ, Dept Ind Engn, I-3513 Padua, Italy
关键词
Finite element analysis; flux-weakening operation; hybrid excitation; hybrid excited permanent magnet motor; magnetic analysis; permanent magnet machines; permanent magnet machine control;
D O I
10.1109/TIA.2023.3298869
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
This article deals with a full procedure to design a Hybrid Excitation Permanent Magnet (HEPM) synchronous motor. At first the analytical initial sizing is described. It is followed by a more comprehensive two-dimensional finite element analysis. Then, the estimated motor capability is confirmed through experimental measurements on a HEPM motor prototype. The article gives information on the motor geometry, magnetic circuit, parameter determination, and motor alignment. The procedures for analyzing the motor under no-load and on-load conditions are described. At last, the predicted results are compared to measurements on a test bench.
引用
收藏
页码:6645 / 6654
页数:10
相关论文
共 50 条
  • [21] Comparative study of thrust of U-shaped ironless permanent magnet synchronous linear motor based on analytical method and finite element analysis
    Yang, Zhihui
    Liu, Ren
    Xia, Bin
    INTERNATIONAL JOURNAL OF APPLIED ELECTROMAGNETICS AND MECHANICS, 2020, 64 (1-4) : 1091 - 1101
  • [22] Optimised design of permanent magnet assisted synchronous reluctance motor series using combined analytical-finite element analysis based approach
    Stipetic, Stjepan
    Zarko, Damir
    Kovacic, Marinko
    IET ELECTRIC POWER APPLICATIONS, 2016, 10 (05) : 330 - 338
  • [23] Research on Real-time Emulator Based on Finite Element Analysis for Permanent Magnet Synchronous Motor
    Wang Z.
    Sun Q.
    Li H.
    Wang J.
    Shen H.
    Beijing Ligong Daxue Xuebao/Transaction of Beijing Institute of Technology, 2021, 41 (09): : 918 - 926
  • [24] Modeling and Analysis of Hybrid Permanent Magnet Type Bearingless Motor
    Zhang, Tao
    Liu, Xinfeng
    Mo, Lihong
    Ye, Xiaoting
    Ni, Wei
    Ding, Weihong
    Huang, Juang
    Wang, Xue
    IEEE TRANSACTIONS ON MAGNETICS, 2018, 54 (03)
  • [25] Finite Element Analysis of a Permanent Magnet Machine with Two Contra-rotating Rotors
    Ranlof, Martin
    Lundin, Urban
    ELECTRIC POWER COMPONENTS AND SYSTEMS, 2009, 37 (12) : 1334 - 1347
  • [26] Finite element analysis of an outer-rotor permanent-magnet brushless DC motor for light traction
    Lopez-Femandez, Xose M.
    Gyselinck, J.
    Silveira-Correa, R.
    COMPEL-THE INTERNATIONAL JOURNAL FOR COMPUTATION AND MATHEMATICS IN ELECTRICAL AND ELECTRONIC ENGINEERING, 2006, 25 (03) : 705 - 712
  • [27] Based on the comparative analysis of the length of the air gap length of the finite element simulation permanent magnet synchronous motor
    Zhang, Guodong
    Song, Ningran
    Zhou, Guangxu
    Zhu, Mengmei
    Guo, Lei
    Li, Hongyang
    2022 25TH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS 2022), 2022,
  • [28] APPLICATION OF ARTIFICIAL BEE COLONY ALGORITHM AND FINITE ELEMENT ANALYSIS FOR OPTIMUM DESIGN OF BRUSHLESS PERMANENT MAGNET MOTOR
    Ilka, R.
    Gholamain, S. Asghar
    Kholerdi, H. A.
    Ebrahimzadeh, A.
    IIUM ENGINEERING JOURNAL, 2012, 13 (01): : 67 - 79
  • [29] Optimal Design and Finite Element Analysis of a High Speed, Axial-Flux Permanent Magnet Synchronous Motor
    Seadati, Seyed Ali Seyedi
    Niasar, Abolfazl Halvaei
    9TH ANNUAL POWER ELECTRONICS, DRIVES SYSTEMS, AND TECHNOLOGIES CONFERENCE (PEDSTC2018), 2018, : 133 - 138
  • [30] Magnet Field Finite Element Analysis of Permanent Magnet Brushless DC Motors Based on ANSOFT
    Zhu, Caihong
    Zhang, Hongtao
    PROCEEDINGS OF THE 4TH INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING AND MECHANICS, 2011, : 738 - 742