Steady and Unsteady Flow Characteristics inside Short Jet Self-Priming Pump

被引:4
|
作者
Yu, Hao [1 ,2 ]
Wang, Chuan [1 ,2 ]
Li, Guohui [3 ]
Wang, Hongliang [2 ,4 ]
Yang, Yang [2 ]
Wu, Shaohui [2 ]
Cao, Weidong [5 ]
Li, Shanshan [6 ]
机构
[1] Hainan Vocat Univ Sci & Technol, Coll Mechatron Engn, Haikou 571126, Peoples R China
[2] Yangzhou Univ, Coll Hydraul Sci & Engn, Yangzhou 225009, Peoples R China
[3] Gongqing Inst Sci & Technol, Int Shipping Res Inst, Jiujiang 332020, Peoples R China
[4] Changzhou Inst Technol, Flight Coll, Sch Aerosp & Mech Engn, Changzhou 213032, Peoples R China
[5] Jiangsu Univ, High Tech Key Lab Agr Equipment & Intelligentizat, Zhenjiang 212013, Peoples R China
[6] Xian Univ Technol, State Key Lab Ecohydraul Northwest Arid Reg, Xian 710048, Peoples R China
基金
中国国家自然科学基金; 中国博士后科学基金;
关键词
short jet self-priming pump; unsteady; impeller; flow field; pressure pulsation; CENTRIFUGAL PUMP;
D O I
10.3390/su151813643
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
Due to their great efficiency and minimal loss, self-priming jet pumps are frequently employed in a variety of sectors for sustainable development. A short jet self-priming pump's steady and unsteady flow characteristics are investigated numerically in this study using a standard k-epsilon turbulence model. The precision and dependability of the numerical calculations used in this work are demonstrated by the less than 2% difference between the pump performance data from the numerical calculation and the external characteristics test results for each flow condition. It was found that due to the perpendicularity of the nozzle axis to the impeller axis, the high-flow velocity zone in the nozzle gradually deviates to the side away from the impeller under high-flow conditions. Backflow is generated on the side close to the impeller, where eccentric vortices are created. As time progresses, the asymmetry of the low-pressure zone within the impeller becomes more pronounced under high-flow conditions, and the fluid is unable to form a stable vortex structure at a specific location. This is an important cause of impeller vibration and noise. The nonlinear vibration at the impeller inlet is less periodic, while the increase in flow rate can make the nonlinear vibration generated within the impeller more regular and stable. This reflects the fact that the fluid flow at small flow rates is more likely to be affected by the blade configuration and the shape of the flow channel, which leads to fluid instability and discontinuity. For various flow rates, the main frequency of the pressure pulsation is higher at the impeller intake (W1) than it is in the impeller channel (W-2 similar to 7). Additionally, the pressure pulsation is more frequent before 10 times the rotational frequency, with no significant regularity. This suggests that the impeller and injector rear chamber dynamic and static interference impacts may have some bearing on the pressure pulsation. The pressure pulsation coefficients (W-2 similar to 7) in the impeller at different flow rates show an exponentially decreasing trend with the increase of multiples of five in the rotation frequency. The equations for the relationship between C-P and 5N(F) were obtained, respectively: CP-Q1 = 0.07044 x exp(-0.2372N(F)), CP-Q3 = 0.06776 x exp(-0.2564 N-F), CP-Q5 = 0.07005 x exp(-0.2884 N-F). The findings of this study contribute to understanding the flow inhomogeneities inside the pump as well as the analysis of the internal pump vibration, enhancing the jet pump's efficiency and lifespan.
引用
收藏
页数:23
相关论文
共 50 条
  • [41] Self-priming characteristics of flexible impeller pumps
    Hubbard, Brian
    World Pumps, 2000, (405)
  • [42] Investigation of Self-Priming Process of a Centrifugal Pump with Double Blades
    Qian Heng
    Mou Jiegang
    Ren Yun
    Zhu Zhibing
    Liu Nuojia
    Zheng Shuihua
    Wu Denghao
    JOURNAL OF THERMAL SCIENCE, 2021, 30 (03) : 849 - 858
  • [43] Multistage Self-priming Pump Performance Simulation & Test Research
    Liang, Gaofeng
    Gao, Qiang
    MATERIAL SCIENCE, CIVIL ENGINEERING AND ARCHITECTURE SCIENCE, MECHANICAL ENGINEERING AND MANUFACTURING TECHNOLOGY II, 2014, 651-653 : 780 - +
  • [44] Investigation of Self-Priming Process of a Centrifugal Pump with Double Blades
    QIANHeng
    MOUJiegang
    RENYun
    ZHUZhibing
    LIUNuojia
    ZHENGShuihua
    WUDenghao
    JournalofThermalScience, 2021, 30 (03) : 849 - 858
  • [45] Influence of the Area of the Reflux Hole on the Performance of a Self-Priming Pump
    Mou, Jiegang
    Zhang, Fengye
    Wang, Haoshuai
    Wu, Denghao
    FDMP-FLUID DYNAMICS & MATERIALS PROCESSING, 2019, 15 (03): : 187 - 205
  • [46] Investigation of Self-Priming Process of a Centrifugal Pump with Double Blades
    Heng Qian
    Jiegang Mou
    Yun Ren
    Zhibing Zhu
    Nuojia Liu
    Shuihua Zheng
    Denghao Wu
    Journal of Thermal Science, 2021, 30 : 849 - 858
  • [47] Effect of blade profile with different thickness distribution on the pressure characteristics of novel self-priming pump
    Chang, Hao
    Li, Wei
    Shi, Weidong
    Liu, Jianrui
    JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2018, 40 (11)
  • [48] Effect of blade profile with different thickness distribution on the pressure characteristics of novel self-priming pump
    Hao Chang
    Wei Li
    Weidong Shi
    Jianrui Liu
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2018, 40
  • [49] Experimental Optimization of Jet Self-Priming Centrifugal Pump Based on Orthogonal Design and Grey-Correlational Method
    Hao Chang
    Weidong Shi
    Wei Li
    Chuan Wang
    Ling Zhou
    Jianrui Liu
    Yongfei Yang
    K. Agarwal Ramesh
    Journal of Thermal Science, 2020, 29 : 241 - 250
  • [50] Experimental Optimization of Jet Self-Priming Centrifugal Pump Based on Orthogonal Design and Grey-Correlational Method
    CHANG Hao
    SHI Weidong
    LI Wei
    WANG Chuan
    ZHOU Ling
    LIU Jianrui
    YANG Yongfei
    RAMESH K.Agarwal
    Journal of Thermal Science, 2020, 29 (01) : 241 - 250