Steady and Unsteady Flow Characteristics inside Short Jet Self-Priming Pump

被引:4
|
作者
Yu, Hao [1 ,2 ]
Wang, Chuan [1 ,2 ]
Li, Guohui [3 ]
Wang, Hongliang [2 ,4 ]
Yang, Yang [2 ]
Wu, Shaohui [2 ]
Cao, Weidong [5 ]
Li, Shanshan [6 ]
机构
[1] Hainan Vocat Univ Sci & Technol, Coll Mechatron Engn, Haikou 571126, Peoples R China
[2] Yangzhou Univ, Coll Hydraul Sci & Engn, Yangzhou 225009, Peoples R China
[3] Gongqing Inst Sci & Technol, Int Shipping Res Inst, Jiujiang 332020, Peoples R China
[4] Changzhou Inst Technol, Flight Coll, Sch Aerosp & Mech Engn, Changzhou 213032, Peoples R China
[5] Jiangsu Univ, High Tech Key Lab Agr Equipment & Intelligentizat, Zhenjiang 212013, Peoples R China
[6] Xian Univ Technol, State Key Lab Ecohydraul Northwest Arid Reg, Xian 710048, Peoples R China
基金
中国国家自然科学基金; 中国博士后科学基金;
关键词
short jet self-priming pump; unsteady; impeller; flow field; pressure pulsation; CENTRIFUGAL PUMP;
D O I
10.3390/su151813643
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
Due to their great efficiency and minimal loss, self-priming jet pumps are frequently employed in a variety of sectors for sustainable development. A short jet self-priming pump's steady and unsteady flow characteristics are investigated numerically in this study using a standard k-epsilon turbulence model. The precision and dependability of the numerical calculations used in this work are demonstrated by the less than 2% difference between the pump performance data from the numerical calculation and the external characteristics test results for each flow condition. It was found that due to the perpendicularity of the nozzle axis to the impeller axis, the high-flow velocity zone in the nozzle gradually deviates to the side away from the impeller under high-flow conditions. Backflow is generated on the side close to the impeller, where eccentric vortices are created. As time progresses, the asymmetry of the low-pressure zone within the impeller becomes more pronounced under high-flow conditions, and the fluid is unable to form a stable vortex structure at a specific location. This is an important cause of impeller vibration and noise. The nonlinear vibration at the impeller inlet is less periodic, while the increase in flow rate can make the nonlinear vibration generated within the impeller more regular and stable. This reflects the fact that the fluid flow at small flow rates is more likely to be affected by the blade configuration and the shape of the flow channel, which leads to fluid instability and discontinuity. For various flow rates, the main frequency of the pressure pulsation is higher at the impeller intake (W1) than it is in the impeller channel (W-2 similar to 7). Additionally, the pressure pulsation is more frequent before 10 times the rotational frequency, with no significant regularity. This suggests that the impeller and injector rear chamber dynamic and static interference impacts may have some bearing on the pressure pulsation. The pressure pulsation coefficients (W-2 similar to 7) in the impeller at different flow rates show an exponentially decreasing trend with the increase of multiples of five in the rotation frequency. The equations for the relationship between C-P and 5N(F) were obtained, respectively: CP-Q1 = 0.07044 x exp(-0.2372N(F)), CP-Q3 = 0.06776 x exp(-0.2564 N-F), CP-Q5 = 0.07005 x exp(-0.2884 N-F). The findings of this study contribute to understanding the flow inhomogeneities inside the pump as well as the analysis of the internal pump vibration, enhancing the jet pump's efficiency and lifespan.
引用
收藏
页数:23
相关论文
共 50 条
  • [21] Effect of particle mass concentration on erosion characteristics of self-priming pump
    Zhang, Wenqi
    Yang, Shuai
    Wu, Dazhuan
    Mou, Jiegang
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2021, 235 (23) : 6782 - 6797
  • [22] Experimental study on shooting self-priming device of self-priming centrifugal pump with inner recirculation
    China Agricultural University, Beijing 100083, China
    不详
    不详
    Shuili Xuebao, 2006, 11 (1384-1388):
  • [23] Numerical simulation of interior flow and performance prediction for self-priming pump
    Li, Hong
    Wang, Tao
    Paiguan Jixie Gongcheng Xuebao/Journal of Drainage and Irrigation Machinery Engineering, 2010, 28 (03): : 194 - 197
  • [24] Unsteady numerical simulation for gas-liquid two-phase flow in self-priming process of centrifugal pump
    Huang, Si
    Su, Xianghui
    Guo, Jing
    Yue, Le
    ENERGY CONVERSION AND MANAGEMENT, 2014, 85 : 694 - 700
  • [25] Self-priming bubble tolerant microcylinder pump
    Dolzan, Tine
    Pecar, Borut
    Mozek, Matej
    Resnik, Drago
    Vrtacnik, Danilo
    SENSORS AND ACTUATORS A-PHYSICAL, 2015, 233 : 548 - 556
  • [26] AVOID SELF-PRIMING CENTRIFUGAL PUMP PROBLEMS
    REEVES, GG
    HYDROCARBON PROCESSING, 1987, 66 (01): : 60 - 61
  • [27] Gas-liquid flow patterns visualization in a self-priming centrifugal pump
    Wu, Denghao
    Ren, Yun
    Sorensen, Henrik
    Qian, Heng
    Mou, Jiegang
    FLOW MEASUREMENT AND INSTRUMENTATION, 2023, 92
  • [28] Optimization design of structural parameters of rotational flow self-priming pump body
    Wang, Chunlin
    Liu, Hongguang
    Si, Yanlei
    Wu, Zhiwang
    Yi, Tongxiang
    Nongye Gongcheng Xuebao/Transactions of the Chinese Society of Agricultural Engineering, 2009, 25 (11): : 146 - 151
  • [29] Self-priming vortex pump variable speed performance and internal flow test
    Sha, Yi
    Li, Jinlei
    Liu, Xiangsong
    Hou, Liyan
    Cheng, Feng
    Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery, 2009, 40 (12): : 119 - 124
  • [30] Self-priming radial flow nozzle
    Zlokarnik, M
    Susa, J
    CHEMIE INGENIEUR TECHNIK, 1996, 68 (12) : 1572 - 1574