Steady and Unsteady Flow Characteristics inside Short Jet Self-Priming Pump

被引:4
|
作者
Yu, Hao [1 ,2 ]
Wang, Chuan [1 ,2 ]
Li, Guohui [3 ]
Wang, Hongliang [2 ,4 ]
Yang, Yang [2 ]
Wu, Shaohui [2 ]
Cao, Weidong [5 ]
Li, Shanshan [6 ]
机构
[1] Hainan Vocat Univ Sci & Technol, Coll Mechatron Engn, Haikou 571126, Peoples R China
[2] Yangzhou Univ, Coll Hydraul Sci & Engn, Yangzhou 225009, Peoples R China
[3] Gongqing Inst Sci & Technol, Int Shipping Res Inst, Jiujiang 332020, Peoples R China
[4] Changzhou Inst Technol, Flight Coll, Sch Aerosp & Mech Engn, Changzhou 213032, Peoples R China
[5] Jiangsu Univ, High Tech Key Lab Agr Equipment & Intelligentizat, Zhenjiang 212013, Peoples R China
[6] Xian Univ Technol, State Key Lab Ecohydraul Northwest Arid Reg, Xian 710048, Peoples R China
基金
中国国家自然科学基金; 中国博士后科学基金;
关键词
short jet self-priming pump; unsteady; impeller; flow field; pressure pulsation; CENTRIFUGAL PUMP;
D O I
10.3390/su151813643
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
Due to their great efficiency and minimal loss, self-priming jet pumps are frequently employed in a variety of sectors for sustainable development. A short jet self-priming pump's steady and unsteady flow characteristics are investigated numerically in this study using a standard k-epsilon turbulence model. The precision and dependability of the numerical calculations used in this work are demonstrated by the less than 2% difference between the pump performance data from the numerical calculation and the external characteristics test results for each flow condition. It was found that due to the perpendicularity of the nozzle axis to the impeller axis, the high-flow velocity zone in the nozzle gradually deviates to the side away from the impeller under high-flow conditions. Backflow is generated on the side close to the impeller, where eccentric vortices are created. As time progresses, the asymmetry of the low-pressure zone within the impeller becomes more pronounced under high-flow conditions, and the fluid is unable to form a stable vortex structure at a specific location. This is an important cause of impeller vibration and noise. The nonlinear vibration at the impeller inlet is less periodic, while the increase in flow rate can make the nonlinear vibration generated within the impeller more regular and stable. This reflects the fact that the fluid flow at small flow rates is more likely to be affected by the blade configuration and the shape of the flow channel, which leads to fluid instability and discontinuity. For various flow rates, the main frequency of the pressure pulsation is higher at the impeller intake (W1) than it is in the impeller channel (W-2 similar to 7). Additionally, the pressure pulsation is more frequent before 10 times the rotational frequency, with no significant regularity. This suggests that the impeller and injector rear chamber dynamic and static interference impacts may have some bearing on the pressure pulsation. The pressure pulsation coefficients (W-2 similar to 7) in the impeller at different flow rates show an exponentially decreasing trend with the increase of multiples of five in the rotation frequency. The equations for the relationship between C-P and 5N(F) were obtained, respectively: CP-Q1 = 0.07044 x exp(-0.2372N(F)), CP-Q3 = 0.06776 x exp(-0.2564 N-F), CP-Q5 = 0.07005 x exp(-0.2884 N-F). The findings of this study contribute to understanding the flow inhomogeneities inside the pump as well as the analysis of the internal pump vibration, enhancing the jet pump's efficiency and lifespan.
引用
收藏
页数:23
相关论文
共 50 条
  • [1] Energy loss and unsteady flow characteristics in a self-priming pump
    Shu X.
    Ren Y.
    Wu D.
    Zhu Z.
    Mou J.
    Shuili Xuebao/Journal of Hydraulic Engineering, 2019, 50 (08): : 1010 - 1020
  • [2] The Spatio-Temporal Characteristics of Flow Field Inside a Self-Priming Pump During the Self-Priming Process
    Zhang, Yu-Liang
    Li, Jin-Fu
    Zhao, Yan-Juan
    Guo, Xiao-Mei
    Zhu, Zu-Chao
    ENERGY SCIENCE & ENGINEERING, 2025, 13 (02) : 833 - 846
  • [3] Experimental Visualization Study on Flow Characteristics Inside a Self-Priming Sewage Pump
    Xu, Mingjie
    Zheng, Shuihua
    Li, Yiliang
    Huang, Qing
    Sun, Zenan
    Hu, Jianlin
    WATER, 2025, 17 (05)
  • [4] Transient Flow Characteristics in Self-Priming Centrifugal Pump Volute
    Mou J.
    Wu Z.
    Zhou P.
    Gu Y.
    Wu D.
    Ren Y.
    Shanghai Jiaotong Daxue Xuebao/Journal of Shanghai Jiaotong University, 2018, 52 (04): : 461 - 468
  • [5] Effects of internal circulation flow on self-priming performance of flow-ejecting self-priming pump
    Wang, Yang
    Li, Guidong
    Cao, Puyu
    Yin, Gang
    Cui, Yurui
    Li, Yacheng
    Wang, Yang, 1600, Chinese Society of Agricultural Machinery (45): : 129 - 133
  • [6] Numerical investigation on self-priming process of self-priming pump
    FALL Ibra
    PAN Zhongyong
    ZHANG Desheng
    DESMOND Appiah
    ALI Asad
    YANG Bo
    排灌机械工程学报, 2020, 38 (11) : 1113 - 1118
  • [7] Vibration characteristics of self-priming jet flexible impeller
    Zhang C.
    Zhang J.
    Gong B.
    Li M.
    Yuan J.
    Li H.
    Huagong Jinzhan/Chemical Industry and Engineering Progress, 2023, 42 (04): : 1728 - 1738
  • [8] Derivation and experiments for jet nozzles' coefficients of self-priming irrigation pump
    Technical and Research Center of Fluid Machinery Engineering, Jiangsu University, Zhenjiang, Jiangsu 212013, China
    Paiguan Jixie, 2009, 4 (228-231):
  • [9] Influence of impeller with splitter blades on jet self-priming centrifugal pump
    Dong L.
    Pan Q.
    Liu H.
    Dai C.
    Xu J.
    Xu H.
    Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology), 2019, 50 (08): : 2033 - 2042
  • [10] Effect of Reflux Hole on the Transient Flow Characteristics of the Self-Priming Sewage Centrifugal Pump
    Zhou, P.
    Wu, Z.
    Mou, J.
    Wu, D.
    Zheng, S.
    Gu, Y.
    JOURNAL OF APPLIED FLUID MECHANICS, 2019, 12 (03) : 689 - 699