Microstructures and mechanical properties of TA1 sintered samples prepared by injection molding using water-soluble binder

被引：0
作者：
Zhang, Weichen [1 ]
Li, Lu [1 ,2 ,6 ]
Cao, Peng [3 ]
Chen, Gang [4 ]
Hayat, Muhammad Dilawer [5 ]
机构：
[1] Kunming Univ Sci & Technol, Fac Mat Sci & Engn, Kunming, Peoples R China
[2] Kunming Univ Sci & Technol, Res Ctr Anal & Measurement, Kunming, Peoples R China
[3] Univ Auckland, Fac Engn Chem & Mat Engn, Auckland, New Zealand
[4] Univ Sci & Technol Beijing, Fac Mat Sci & Engn, Beijing, Peoples R China
[5] Univ Waikato, Fac Engn, Hamilton, New Zealand
[6] Kunming Univ Sci & Technol, Fac Mat Sci & Engn, Kunming 650093, Peoples R China
来源：
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY | 2024年 / 38卷 / 15期
关键词：
Water-soluble binder; injection molding; sintering temperature; mechanical properties; carbon and oxygen contents; PURE TITANIUM; OXYGEN CONCENTRATION; BEHAVIOR; SYSTEM;
D O I：
10.1080/01694243.2024.2320502
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
A water-soluble binder was used to obtain TA1 sintered samples prepared by injection molding. The effects of the sintering temperature on the microstructures and mechanical properties of the sintered samples were analyzed. A relative density of >91% is achieved. Some residual carbon and oxygen remain in the sintered samples, affecting the mechanical properties. The tensile strength and elongation of the sample sintered at 1,300 C-degrees are the highest: 592 MPa and 12.95%, respectively. Detailed electron microscopic analysis was performed to identify the morphology and nature of the resultant titanium carbides and oxides.
引用
收藏
页码：2856 / 2873
页数：18
相关论文
共 37 条
  • [31] Comparison of the corrosion behavior of pure titanium and its alloys in fluoride-containing sulfuric acid
    Wang, Z. B.
    Hu, H. X.
    Zheng, Y. G.
    Ke, W.
    Qiao, Y. X.
    [J]. CORROSION SCIENCE, 2016, 103 : 50 - 65
  • [32] Effects of oxygen concentration and temperature on deformation behavior of Ti-Nb-Zr-Ta-O alloys
    Wei, Le Si
    Kim, Hee Young
    Koyano, Tamotsu
    Miyazaki, Shuichi
    [J]. SCRIPTA MATERIALIA, 2016, 123 : 55 - 58
  • [33] Effects of oxygen concentration and phase stability on nano-domain structure and thermal expansion behavior of Ti-Nb-Zr-Ta-O alloys
    Wei, Le Si
    Kim, Hee Young
    Miyazaki, Shuichi
    [J]. ACTA MATERIALIA, 2015, 100 : 313 - 322
  • [34] Sinter structure analysis of titanium structures fabricated via binder jetting additive manufacturing
    Wheat, Evan
    Vlasea, Mihaela
    Hinebaugh, James
    Metcalfe, Craig
    [J]. MATERIALS & DESIGN, 2018, 156 : 167 - 183
  • [35] Influences of sintering temperature on pore morphology, porosity, and mechanical behavior of porous Ti
    Yang, Ding
    Tian, Zhenyun
    Song, Jingjing
    Lu, Tengfei
    Qiu, Guibao
    Kang, Jialong
    Zhou, Hanghang
    Mao, Hongxia
    Xiao, Jian
    [J]. MATERIALS RESEARCH EXPRESS, 2021, 8 (10)
  • [36] Effect of carbon content on the microstructure and bonding properties of hot-rolling pure titanium clad carbon steel plates
    Yu, Chao
    Fu, Lun
    Xiao, Hong
    Lv, Qiang
    Gao, Boxing
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 820
  • [37] Effect of Polyvinylpyrrolidone Content on Pure Titanium Injection Molding
    Zhang, Weichen
    Li, Lu
    Li, Chuanyong
    Sun, Yanhua
    Hayat, Muhammad Dilawer
    Li, Yugeng
    Chen, Gang
    Yuan, Zhentao
    Wang, Xiao
    [J]. CRYSTALS, 2023, 13 (11)
1234