An inverse Hall-Petch behavior and improving toughness in translucent nanocrystalline high-entropy zirconate ceramic

被引:14
作者
Deng, Mao [1 ,2 ]
Huang, Zhangyi [2 ]
Guo, Wanying [1 ,2 ]
Shi, Yang [1 ,2 ]
Duan, Junjing [3 ,4 ]
Qi, Jianqi [3 ,4 ]
Wang, Haomin [2 ]
机构
[1] Chengdu Univ, Sch Mech Engn, Chengdu 610106, Peoples R China
[2] Chengdu Univ, Inst Adv Study, Chengdu 610106, Peoples R China
[3] Sichuan Univ, Coll Phys, Chengdu 610064, Peoples R China
[4] Sichuan Univ, Key Lab Radiat Phys & Technol, Minist Educ, Chengdu 610064, Peoples R China
基金
中国国家自然科学基金;
关键词
High -entropy ceramic; Zirconate; Nano; -crystalline; Inverse Hall-Petch; Hardness; HIGH-PRESSURE; GRAIN-SIZE; DENSIFICATION;
D O I
10.1016/j.jeurceramsoc.2022.11.052
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Short-range order is a new strengthening effect that can significantly affect the mechanical properties of high -entropy materials. Furthermore, simulation results show that this strengthening effect at a quasi-atomic scale can suppress the grain size softening, leading to the disappearance of inverse Hall-Petch behavior in nano -crystalline high-entropy materials. In this work, the evident inverse Hall-Petch behavior is confirmed in the translucent nanocrystalline high-entropy ceramic (HEC) with an average grain size below 10 nm, fabricated by a high-pressure low-temperature sintering technique. Besides, the as-obtained nanocrystalline HEC also shows an improving fracture toughness compared with the corresponding coarse-crystalline HEC.
引用
收藏
页码:1746 / 1750
页数:5
相关论文
共 35 条
[1]   High-entropy ceramics: Review of principles, production and applications [J].
Akrami, Saeid ;
Edalati, Parisa ;
Fuji, Masayoshi ;
Edalati, Kaveh .
MATERIALS SCIENCE & ENGINEERING R-REPORTS, 2021, 146
[2]   Estimation of micro-Hall-Petch coefficients for prismatic slip system in Mg-4Al as a function of grain boundary parameters [J].
Andani, Mohsen Taheri ;
Lakshmanan, Aaditya ;
Sundararaghavan, Veera ;
Allison, John ;
Misra, Amit .
ACTA MATERIALIA, 2022, 226
[3]   What is behind the inverse Hall-Petch effect in nanocrystalline materials? [J].
Carlton, C. E. ;
Ferreira, P. J. .
ACTA MATERIALIA, 2007, 55 (11) :3749-3756
[4]   Yielding nature and Hall-Petch relationships in Ti-6Al-4V alloy with fully equiaxed and bimodal microstructures [J].
Chong, Yan ;
Deng, Guanyu ;
Gao, Si ;
Yi, Jangho ;
Shibata, Akinobu ;
Tsuji, Nobuhiro .
SCRIPTA MATERIALIA, 2019, 172 :77-82
[5]   Six decades of the Hall-Petch effect - a survey of grain-size strengthening studies on pure metals [J].
Cordero, Z. C. ;
Knight, B. E. ;
Schuh, C. A. .
INTERNATIONAL MATERIALS REVIEWS, 2016, 61 (08) :495-512
[6]   Tuning element distribution, structure and properties by composition in high-entropy alloys [J].
Ding, Qingqing ;
Zhang, Yin ;
Chen, Xiao ;
Fu, Xiaoqian ;
Chen, Dengke ;
Chen, Sijing ;
Gu, Lin ;
Wei, Fei ;
Bei, Hongbin ;
Gao, Yanfei ;
Wen, Minru ;
Li, Jixue ;
Zhang, Ze ;
Zhu, Ting ;
Ritchie, Robert O. ;
Yu, Qian .
NATURE, 2019, 574 (7777) :223-+
[7]   Breakdown of the Hall-Petch relationship in extremely fine nanograined body-centered cubic Mo alloys [J].
Duan, F. H. ;
Naunheim, Y. ;
Schuh, C. A. ;
Li, Y. .
ACTA MATERIALIA, 2021, 213
[8]   Microstructure and strengthening mechanisms in an FCC structured single-phase nanocrystalline Co25Ni25Fe25Al7.5Cu17.5 high-entropy alloy [J].
Fu, Zhiqiang ;
Chen, Weiping ;
Wen, Haiming ;
Zhang, Dalong ;
Chen, Zhen ;
Zheng, Baolong ;
Zhou, Yizhang ;
Lavernia, Enrique J. .
ACTA MATERIALIA, 2016, 107 :59-71
[9]   Grain Boundary Sliding and Amorphization are Responsible for the Reverse Hall-Petch Relation in Superhard Nanocrystalline Boron Carbide [J].
Guo, Dezhou ;
Song, Shuangxi ;
Luo, Ruichun ;
Goddard, William A., III ;
Chen, Mingwei ;
Reddy, Kolan Madhav ;
An, Qi .
PHYSICAL REVIEW LETTERS, 2018, 121 (14)
[10]   A detailed analysis of the determination of fracture toughness by nanoindentation induced radial cracks [J].
Guo, Yuning ;
Staedler, Thorsten ;
Mueller, Julian ;
Heuser, Steffen ;
Butz, Benjamin ;
Jiang, Xin .
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2020, 40 (02) :276-289