Performance Analysis of Conventional and DMLS Copper Electrode During EDM Process in AA4032-TiC Composite

In recent days, the additive manufacturing process plays a vital role in the production of tool electrodes, which are used in the electrical discharge machining (EDM) process. In this work, the copper (Cu) electrodes prepared using the direct metal laser sintering (DMLS) process are used for the EDM process. The performance of the DMLS Cu electrode is studied by machining the AA4032-TiC composite material using the EDM process. Then the performance of the DMLS Cu electrode is compared with the conventional Cu electrode. Three input parameters, such as peak current (A), pulse on time (s), and gap voltage (v), are selected for the EDM process. The performance measures, which are determined during the EDM process, are material removal rate (MRR), tool wear rate, surface roughness (SR), microstructural analysis of machined surface, and residual stress.At a higher pulse on time, more material was removed from the workpiece surface and thus MRR is enhanced. Likewise, at a higher peak current, the SR is amplified and thus wider craters are formed on the machined surface. The residual stress on the machined surface has influenced the formation of craters, microvoids, and globules. Lower SR and residual stress are attained by using DMLS Cu electrode, whereas MRR is higher when using conventional Cu electrode.