Creep Modeling of 3D Printed Carbon Black Reinforced Polyetherimide Composites

被引:1
|
作者
Karabal, Merve [1 ]
Yildiz, Alptekin [1 ]
机构
[1] Istanbul Tech Univ, Aerosp Res Ctr, Aviat Inst, Istanbul, Turkiye
来源
2023 10TH INTERNATIONAL CONFERENCE ON RECENT ADVANCES IN AIR AND SPACE TECHNOLOGIES, RAST | 2023年
关键词
creep behavior; creep modeling; Findley power-law; fused filament fabrication; the Burgers model; BEHAVIOR; NANOCOMPOSITES; PREDICTION;
D O I
10.1109/RAST57548.2023.10197875
中图分类号
V [航空、航天];
学科分类号
08 ; 0825 ;
摘要
Reinforcing strategy by adding nano- and/or microscale fillers leads to enhanced not only mechanical properties of 3D-printed parts but also viscoelastic properties such as creep behavior. To characterize this complex creep behavior of composite materials, viscoelastic mathematical models are used combined with experimental data. As a preliminary study, neat polyetherimide (PEI) and 5, 10, 20 wt.% CB reinforced PEI composite filaments were fabricated in the co-rotating twin-screw extruder. After rheological examinations, dynamic mechanical analysis (DMA) samples were printed by a custom-made 3D printer to realize creep analysis. In this study, the Burgers model and the empirical Findley power-law model were employed to simulate the experimental creep data. Both of the models were able to simulate the experimental data in good agreement. However, the Burgers model could not capture the elastic instantaneous strain but the Findley power-law model gave more agreed curve fits.
引用
收藏
页数:6
相关论文
共 50 条
  • [41] Evaluation of fatigue characteristics of 3D printed/composites reinforced with carbon fiber using design of experiments
    Jamadar, Imran M.
    Kamate, Pavankumara
    Samal, Prasanta Kumar
    POLYMER COMPOSITES, 2024,
  • [42] Experimental and theoretical studies on 3D printed short and continuous carbon fiber hybrid reinforced composites
    Kong, Xiangren
    Sun, Guangyong
    Luo, Quantian
    Brykin, Veniamin
    Qian, Jin
    THIN-WALLED STRUCTURES, 2024, 205
  • [43] 3D Printed Sand Tools for Thermoforming Applications of Carbon Fiber Reinforced Composites-A Perspective
    Guenther, Daniel
    Erhard, Patricia
    Schwab, Simon
    Taha, Iman
    MATERIALS, 2021, 14 (16)
  • [44] Investigation of the shear properties of 3D printed short carbon fiber-reinforced thermoplastic composites
    Tanabi, Hamed
    JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 2022, 35 (11) : 2177 - 2193
  • [45] Study on 3D printed graphene/carbon fiber multi-scale reinforced PLA composites
    Liang, Li
    Huang, Tao
    Yu, Songxiang
    Cao, Weiwei
    Xu, Tingting
    MATERIALS LETTERS, 2021, 300
  • [46] 3D Printed Parts of Polylactic Acid Reinforced with Carbon Black and Alumina Nanofillers for Tribological Applications
    Cardoso, Paulo Henrique Machado
    de Oliveira, Marcelo Ferreira Leao
    de Oliveira, Marcia Gomes
    da Silva Moreira Thire, Rossana Mara
    MACROMOLECULAR SYMPOSIA, 2020, 394 (01)
  • [47] Mechanical and self-sensing properties of 3D printed continuous carbon fiber reinforced composites
    Ye, Wenguang
    Dou, Hao
    Cheng, Yunyong
    Zhang, Dinghua
    Lin, Sheng
    POLYMER COMPOSITES, 2022, 43 (10) : 7428 - 7437
  • [48] Elasto-Plastic Finite Element Modeling of Short Carbon Fiber Reinforced 3D Printed Acrylonitrile Butadiene Styrene Composites
    Sunil Bhandari
    Roberto A. Lopez-Anido
    Lu Wang
    Douglas J. Gardner
    JOM, 2020, 72 : 475 - 484
  • [49] Elasto-Plastic Finite Element Modeling of Short Carbon Fiber Reinforced 3D Printed Acrylonitrile Butadiene Styrene Composites
    Bhandari, Sunil
    Lopez-Anido, Roberto A.
    Wang, Lu
    Gardner, Douglas J.
    JOM, 2020, 72 (01) : 475 - 484
  • [50] Design considerations and modeling of fiber reinforced 3D printed parts
    van de Werken, Nekoda
    Hurley, Joel
    Khanbolouki, Pouria
    Sarvestani, Ali N.
    Tamijani, Ali Y.
    Tehrani, Mehran
    COMPOSITES PART B-ENGINEERING, 2019, 160 : 684 - 692