Bioinspired fracture toughness enhancement of a fully bio-based epoxy resin

被引:6
作者
Schwaiger, Markus [1 ]
Waly, Christoph [1 ]
Huszar, Michael [1 ]
Oreski, Gernot [2 ]
Feuchter, Michael [1 ]
Arbeiter, Florian [1 ]
Resch-Fauster, Katharina [1 ]
机构
[1] Univ Leoben, Mat Sci & Testing Polymers, Otto Gloeckel Str 2, A-8700 Leoben, Austria
[2] Polymer Competence Ctr Leoben GmbH, Roseggerstr 12, A-8700 Leoben, Austria
基金
欧盟地平线“2020”;
关键词
Bio-based epoxy resin; Bio-composite; Epoxidized linseed oil; Fracture toughness; Material inhomogeneity; Layered structures; MULTILAYER; STRENGTH; MODULUS; DESIGN;
D O I
10.1016/j.polymertesting.2023.108098
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
In this work, the concept of fracture toughness improvement via spatial variation of mechanical properties is applied to a composite with 100% bio-based carbon content based on epoxidized linseed oil. By proper selection of the hardener, either citric acid or sebacic acid, the mechanical properties were adjusted in a way that a biocomposite exhibits a stiff-soft-stiff layer architecture. Samples with two different thicknesses of soft interlayer (approx. 0.1 mm and 1.3 mm) were subsequently analyzed regarding their final performance. Specimen characteristics, owing to the curing and manufacturing process, were analyzed by means of local Fourier-transform infrared spectroscopy and differential scanning calorimetry. Fracture mechanics tests were performed to verify if the soft interlayer acts as a crack arrester. The results propose a high chemical compatibility between the used epoxy resins. Embedding a soft thin interlayer into a stiff resin matrix led to an increase in fracture toughness of 13 times, compared to the pure stiff resin. An increase in interlayer thickness led to a further increase in fracture toughness of 24 times. However, the stiffness decreased by 44% and 67%, respectively.
引用
收藏
页数:10
相关论文
共 52 条
[1]   Skeleton of Euplectella sp.:: Structural hierarchy from the nanoscale to the macroscale [J].
Aizenberg, J ;
Weaver, JC ;
Thanawala, MS ;
Sundar, VC ;
Morse, DE ;
Fratzl, P .
SCIENCE, 2005, 309 (5732) :275-278
[2]   New insights into the properties of alkali-degradable thermosets based on epoxidized soy oil and plant-derived dicarboxylic acids [J].
Allasia, Mariana ;
Estevez, Virginia Gonzalez ;
Chesta, Aldana A. ;
Baccifava, Ruben ;
Gugliotta, Luis M. ;
Igarzabal, Cecilia I. Alvarez ;
Picchio, Matias L. ;
Minari, Roque J. .
POLYMER, 2021, 232
[3]   Self-healable polymer networks based on the cross-linking of epoxidised soybean oil by an aqueous citric acid solution [J].
Altuna, Facundo I. ;
Pettarin, Valeria ;
Williams, Roberto J. J. .
GREEN CHEMISTRY, 2013, 15 (12) :3360-3366
[4]   High-performance thermoset with 100 % bio-based carbon content [J].
Anusic, Andrea ;
Bloessl, Yannick ;
Oreski, Gernot ;
Resch-Fauster, Katharina .
POLYMER DEGRADATION AND STABILITY, 2020, 181
[5]   Using Compliant Interlayers as Crack Arresters in 3-D-Printed Polymeric Structures [J].
Arbeiter, Florian J. ;
Petersmann, Sandra ;
Wiener, Johannes ;
Oesterreicher, Florian ;
Spoerk, Martin ;
Pinter, Gerald .
MATERIALS PERFORMANCE AND CHARACTERIZATION, 2020, 9 (05) :688-700
[6]   MATERIALS SELECTION IN MECHANICAL DESIGN [J].
ASHBY, MF ;
CEBON, D .
JOURNAL DE PHYSIQUE IV, 1993, 3 (C7) :1-9
[7]   Recent advances in bio-based epoxy resins and bio-based epoxy curing agents [J].
Baroncini, Elyse A. ;
Yadav, Santosh Kumar ;
Palmese, Giuseppe R. ;
Stanzione, Joseph F., III .
JOURNAL OF APPLIED POLYMER SCIENCE, 2016, 133 (45)
[8]   An experimental investigation of deformation and fracture of nacre-mother of pearl [J].
Barthelat, F. ;
Espinosa, H. D. .
EXPERIMENTAL MECHANICS, 2007, 47 (03) :311-324
[9]   The Earth's Lithosphere Inspires Materials Design [J].
Beygelzimer, Yan ;
Kulagin, Roman ;
Fratzl, Peter ;
Estrin, Yuri .
ADVANCED MATERIALS, 2021, 33 (03)
[10]   Prediction of the fracture toughness of a ceramic multilayer composite - Modeling and experiments [J].
Chen, C. R. ;
Pascual, J. ;
Fischer, F. D. ;
Kolednik, O. ;
Danzer, R. .
ACTA MATERIALIA, 2007, 55 (02) :409-421