Influence of neighbouring damage on delamination growth in multiple indented composites

被引:2
作者
Huo, L. [1 ]
Kassapoglou, C. [1 ]
Alderliesten, R. C. [1 ]
机构
[1] Delft Univ Technol, Fac Aerosp Engn, POB 5058, NL-2600 GB Delft, Netherlands
关键词
Polymer-matrix composites; Quasi-static indentation; Delamination growth; Delamination link-up; LOW-VELOCITY IMPACT; RESIDUAL FLEXURAL PROPERTIES; STATIC INDENTATION; LAMINATED COMPOSITES; TENSILE-STRENGTH; CFRP; COMPRESSION; FAILURE; RESISTANCE; TOLERANCE;
D O I
10.1016/j.matdes.2023.111723
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
To improve current design approaches for composite structures, it is required to further investigate the damage interaction effects of composite materials under multiple out-of-plane concentrated loads. It is first necessary to comprehend the dependence of the effective delamination threshold, which describes whether a delamination grows on pre-existing delamination damage in composite laminates. A com-bined experimental and numerical study is presented, in which two sequential out-of-plane quasi -static indentations are applied to fully clamped composite laminated panels, with changing distances between the two indentation locations changing. The results show that the second indentation delami-nation is more likely to propagate, particularly in the straight-line direction from the second indentation site to the first one, which can be interpreted as a decrease in the effective delamination threshold asso-ciated with microcracks ahead of the delamination front. The relevant percentage reduction is 37% and is independent of the imposed indentation load. As a crucial take-away, designers should be mindful that the damage interaction effects could result in greater damage than the sum of the individual cases.& COPY; 2023 The Author(s). Published by Elsevier Ltd. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).
引用
收藏
页数:11
相关论文
共 50 条
  • [1] Effect of pre-existing damage on delamination growth in repeatedly indented composites
    Huo, L.
    Kassapoglou, C.
    Alderliesten, R. C.
    MATERIALS & DESIGN, 2024, 243
  • [2] Influence of plate vibration on delamination formation in composites under multiple impacts
    Huo, L.
    Gong, X.
    Cao, Z.
    Zhang, M.
    Cao, Y.
    Li, X.
    Tu, W.
    ENGINEERING STRUCTURES, 2025, 324
  • [3] The Effect of Internal Delamination Damage on the Tensile Strength of Aeronautical Composites
    Wang, Qiang
    Chen, Qiuyu
    Chen, Yujie
    Li, Jiandong
    Li, Qun
    ACTA MECHANICA SOLIDA SINICA, 2022, 35 (06) : 979 - 986
  • [4] Damage evolution in quasi-statically indented alumina based oxide/oxide ceramic matrix composites: An experimental investigation
    Sodisetty, V. N. B. Prasad
    Singh, Abhendra K.
    James, Hannah
    Lee, Keeley
    Benedict, Zach
    CERAMICS INTERNATIONAL, 2022, 48 (21) : 32491 - 32503
  • [5] A micropolar cohesive damage model for delamination of composites
    Rahaman, Md. M.
    Deepu, S. P.
    Roy, D.
    Reddy, J. N.
    COMPOSITE STRUCTURES, 2015, 131 : 425 - 432
  • [6] INFLUENCE OF REPEATED IMPACT ON DAMAGE GROWTH IN FIBRE REINFORCED POLYMER COMPOSITES
    Bienias, Jaroslaw
    Surowska, Barbara
    Jakubczak, Patryk
    EKSPLOATACJA I NIEZAWODNOSC-MAINTENANCE AND RELIABILITY, 2015, 17 (02): : 194 - 198
  • [7] Understanding effectiveness of stitching in suppression of impact damage: An empirical delamination reduction trend for stitched composites
    Tan, K. T.
    Watanabe, N.
    Iwahori, Y.
    Ishikawa, T.
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2012, 43 (06) : 823 - 832
  • [8] Delamination influence on elastic properties of laminated composites
    Brito-Santana, Humberto
    Christoff, Bruno Guilherme
    Mendes Ferreira, Antonio Joaquim
    Lebon, Frederic
    Rodriguez-Ramos, Reinaldo
    Tita, Volnei
    ACTA MECHANICA, 2019, 230 (03) : 821 - 837
  • [9] Analysis and prediction of axial force and exit damage in drilling of composites with delamination damage
    Zhang, Shengping
    Hu, Junshan
    Xu, Lei
    Shen, Jinyi
    Xuan, Shanyong
    Tian, Wei
    JOURNAL OF MANUFACTURING PROCESSES, 2024, 132 : 169 - 188
  • [10] Parameter studies and evaluation principles of delamination damage in laminated composites
    Wang, Kangkang
    Zhao, Libin
    Hong, Haiming
    Zhang, Jianyu
    Gong, Yu
    CHINESE JOURNAL OF AERONAUTICS, 2021, 34 (07) : 62 - 72