Influence of sintering process on microstructure and mechanical properties of alumina ceramics: Spark plasma and microwave hybrid sintering

被引：7

作者：

Savio, S. G. ^{[1
,2
]}

Babu, D. Arvindha ^{[1
]}

Ramakrishna, B. ^{[1
]}

Singh, Sarabjit ^{[1
]}

Vanitha, C. ^{[2
]}

机构：

[1] Def Met Res Lab, Hyderabad 500058, India

[2] Natl Inst Technol Warangal, Dept Met & Mate Engg, Warangal 506004, India

来源：

CERAMICS INTERNATIONAL | 2024年 / 50卷 / 07期

关键词：

GRAIN-SIZE DEPENDENCE; BALLISTIC PERFORMANCE; FRACTURE-TOUGHNESS; YOUNGS MODULUS; HARDNESS; POROSITY; SPS;

D O I：

10.1016/j.ceramint.2024.01.078

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Improvement in hardness of alumina has advantages in ballistic performance and wear resistance of the material. Spark plasma sintering (SPS) and microwave hybrid sintering (MHS) were examined for improving the hardness of alumina and results are compared with conventional sintering (CS). Results show that the highest hardness is produced by SPS (20.4 GPa) followed by conventional sintering (18.6 GPa) and microwave hybrid sintering (18.5 GPa) process. Two separate Hall-Petch relations satisfy hardness variation in both SPS, and MHS/CS. The rate of densification is found to be higher for microwave hybrid sintering than the conventional sintering. Sintering of alumina at 1500 degrees C, the microwave hybrid sintering produced a higher density and grain size (90.6 % & 0.8 mu m at 0 h; 98.8 % & 2.3 mu m at 1 h) in comparison with conventional sintering (87.4 % & 0.8 mu m at 0 h; 98.3 % & 2.1 mu m at 1 h) for same sintering (dwell) duration.

引用

页码：11730 / 11742

页数：13

共 32 条

[1] Latest global developments in microwave materials processing [J].

Agrawal, D. .

MATERIALS RESEARCH INNOVATIONS, 2010, 14 (01) :3-8

[2] Influence of porosity on Young's modulus and Poisson's ratio in alumina ceramics [J].

Asmani, M ;

Kermel, C ;

Leriche, A ;

Ourak, M .

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2001, 21 (08) :1081-1086

[3]

Binner J, 2009, MATER SCI FORUM, V606, P51, DOI 10.4028/www.scientific.net/MSF.606.51

[4] Review of ballistic performance of alumina: Comparison of alumina with silicon carbide and boron carbide [J].

Boldin, M. S. ;

Berendeev, N. N. ;

Melekhin, N., V ;

Popov, A. A. ;

Nokhrin, A., V ;

Chuvildeev, V. N. .

CERAMICS INTERNATIONAL, 2021, 47 (18) :25201-25213

[5]

BRANDON JR, 1992, MATER RES SOC SYMP P, V269, P237, DOI 10.1557/PROC-269-237

[6] Microwave sintering of alumina at 2.45 GHz [J].

Brosnan, KH ;

Messing, GL ;

Agrawal, DK .

JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2003, 86 (08) :1307-1312

[7] Spark plasma sintering of magnesia-doped alumina with high hardness and fracture toughness [J].

Chakravarty, Dibyendu ;

Bysakh, Sandip ;

Muraleedharan, Kuttanellore ;

Rao, Tata Narasinga ;

Sundaresan, Ranganathan .

JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2008, 91 (01) :203-208

[8] Vickers indentation fracture toughness of Y-TZP dental ceramics [J].

Coric, Danko ;

Renjo, Marijana Majic ;

Curkovic, Lidija .

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2017, 64 :14-19

[9] Effect of powder reactivity on microwave sintering of alumina [J].

Fang, Y ;

Cheng, JP ;

Agrawal, DK .

MATERIALS LETTERS, 2004, 58 (3-4) :498-501

[10] Improved transparency and hardness in α-alumina ceramics fabricated by high-pressure SPS of nanopowders [J].

Ghanizadeh, Shaghayegh ;

Grasso, Salvatore ;

Ramanujam, Prabhu ;

Vaidhyanathan, Bala ;

Binner, Jon ;

Brown, Peter ;

Goldwasser, Judah .

CERAMICS INTERNATIONAL, 2017, 43 (01) :275-281

← 1 2 3 4 →