Synthesis, characterization and degradation studies of eco-friendly composites from thermoset resins with pistachio shell waste

被引:7
作者
Paczkowski, Przemyslaw [1 ]
Gawdzik, Barbara [1 ]
机构
[1] Marie Curie Sklodowska Univ, Fac Chem, Inst Chem Sci, Dept Polymer Chem, Gliniana 33, PL-20614 Lublin, Poland
关键词
Thermoset resin; Accelerated ageing; Chemical degradation; Mechanical properties; Thermal properties; Pistachio shell; FIBER-REINFORCED COMPOSITES; NATURAL FIBER; MECHANICAL-PROPERTIES; POLYESTER; WATER; BEHAVIOR;
D O I
10.1007/s10973-023-12872-0
中图分类号
O414.1 [热力学];
学科分类号
摘要
The increased interest in the use of polymer composites with natural, biodegradable and renewable fillers is the result of increased awareness of the environment. Therefore, the search for new materials that meet the above expectations is becoming a current issue. The article presents the results of research on composites containing pistachio shells (Pistacia vera L.), which are common agricultural waste, with unsaturated polyester resin based on post-consumer recycled poly(ethylene terephthalate) and vinyl ester resin based on bisphenol-A. The environmentally friendly polymeric cobalt solution was used as the accelerator. In order to study the degradation of the composites, accelerated ageing, immersion in various solvents, and high temperature were used. From the obtained results, it can be observed that accelerated aging resulted in the additional cross-linking of the resin, while the filler absorbed the UV light. During immersion, the polymer matrix was degraded in acetone, whereas the incorporation of pistachio increases its water sorption and the plasticisation effect was also observed. The alkali environment initiated the hydrolysis of ester linkages. The vinyl ester resin-based materials were more chemically and thermally resistant than those from the unsaturated polyester.
引用
收藏
页码:2789 / 2804
页数:16
相关论文
共 40 条
[1]  
Adapa P., 2009, AGR ENG INT CIGR EJO, V11, P1
[2]   Effect of Pistachio Shell Particle Content on the Mechanical Properties of Polymer Composite [J].
Alsaadi, Mohamad ;
Erklig, Ahmet ;
Albu-khaleefah, Khamis .
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2018, 43 (09) :4689-4696
[3]   Preparation of the pistachio shell reinforced PLA biocomposites: Effect of filler treatment and PLA maleation [J].
Altun, Muslum ;
Celebi, Mithat ;
Ovali, Sabih .
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 2022, 35 (09) :1342-1357
[4]  
[Anonymous], 2019, EN ISO 178:2019 Plastics-Determination of flexural properties
[5]  
[Anonymous], 2013, D2457 ASTM INT
[6]  
[Anonymous], 2014, EN ISO 11358-1:2014
[7]  
[Anonymous], 2013, D2583 ASTM INT
[8]  
[Anonymous], 2011, 106402011 EN ISO
[9]  
[Anonymous], 2013, EN ISO 4892-2:2013
[10]  
[Anonymous], 2010, EN ISO 175:2010