The effect of ash fusion characteristic on the structure characteristics of carbon and the migration of potassium during rice straw high-temperature gasification process

被引:3
|
作者
Zhou, Tianxing [1 ]
Zhang, Weiwei [1 ]
Luo, Siyi [1 ]
Zuo, Zongliang [1 ]
Ren, Dongdong [1 ]
机构
[1] Qingdao Univ Technol, Sch Environm & Municipal Engn, Qingdao 266033, Peoples R China
关键词
Residual carbon; Ash fusion characteristic; Structure characteristics; Gasification activity; K migration; BIOMASS GASIFICATION; STRUCTURE EVOLUTION; RESIDUAL CARBON; CO-GASIFICATION; BOTTOM ASH; COMBUSTION; BEHAVIOR; CHAR; SPECTROSCOPY; REACTIVITY;
D O I
10.1016/j.energy.2023.129352
中图分类号
O414.1 [热力学];
学科分类号
摘要
The effect of ash fusion characteristic on the structure characteristics and gasification activity of residual carbon, and the migration of K during biomass (rice straw, B-RS) gasification at 1100 degrees C were investigated. Results showed that the carbon and AAEMs were wrapped by molten ash, and the residual carbons in B-RS gasification char were composed of pyrolytic carbon and partial-gasified carbon. The molten ash formed spherical particles adhering to the surface of gasification char, and the particle size gradually enlarged. With the progress of B-RS gasification, the BET surface area and microporous surface area decreased monotonously, and the I-D1/I-G values increased firstly and then decreased, and the total active sites were poorer at the gasification time of 15 and 20 minutes. The gasification activity of residual carbon had no linear relationship with gasification time, and followed the order of DBRS-25> DBRS-10> DBRS-20 approximate to DBRS-15 approximate to DBRS-5. Furthermore, the total content of K increased obviously, and the water-soluble K, ion-exchanged K, and acid-soluble K were changed to insoluble K with the increase of gasification time.
引用
收藏
页数:11
相关论文
共 38 条
  • [31] Effect of calcium dispersion and graphitization during high-temperature pyrolysis of beech wood char on the gasification rate with CO2
    Schneider, Christoph
    Walker, Stella
    Phounglamcheik, Aekjuthon
    Umeki, Kentaro
    Kolb, Thomas
    FUEL, 2021, 283
  • [32] The influence of γ′ sub/super solvus on the microstructural characteristics and deformation mechanisms during the high-temperature deformation process of Ni-Cr based superalloy
    Ban, Yijie
    Huang, Liang
    Li, Zhonghao
    Li, Changmin
    Guo, Shiqi
    Liu, Kezhuo
    Chen, Xiangguo
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2025, 928
  • [33] Effect of starting powder properties on the structure and mechanical characteristics of Al-8Cr-1.5Fe alloy for high-temperature applications
    Neikov, O. D.
    Sirko, A. I.
    Zakharova, N. P.
    Efimov, N. A.
    Vasil'eva, G. I.
    Sharovskii, A. O.
    Samelyuk, A. V.
    Goncharuk, V. A.
    Ivashchenko, R. K.
    POWDER METALLURGY AND METAL CERAMICS, 2013, 52 (3-4) : 144 - 153
  • [34] Effect of the Arc Furnace Manufacturing Process, Blast Furnace Manufacturing Process, and Carbon Content on the High-temperature Oxidation of Hot-rolled Steel between 650 and 900°C
    Kim, Min Jung
    Lee, Dong Bok
    Baek, Seon-Pil
    KOREAN JOURNAL OF METALS AND MATERIALS, 2010, 48 (10): : 907 - 913
  • [35] Effect of silica additive on the high-temperature fireside tube corrosion during the air-firing and oxy-firing of lignite (Xinjiang coal) - Characteristics of bulk and cross-sectional surfaces for the tubes
    Ja'baz, Iman
    Chen, Juan
    Etschmann, Barbara
    Ninomiya, Yoshihiko
    Zhang, Lian
    FUEL, 2017, 187 : 68 - 83
  • [36] Detailed electrical and mechanical retention characteristics of MoSi2-RSiC composites exhibiting three-dimensional (3D) interpenetrated network structure during long-term high-temperature oxidation process
    Xie, Wen
    Gao, Peng-zhao
    Li, Dong-yun
    Lv, Hua-nan
    Huang, Shi-ting
    Xiao, Han-ning
    CERAMICS INTERNATIONAL, 2016, 42 (05) : 5873 - 5884
  • [37] Precipitation of Cu- and Nb-rich phases and its strengthening effect in 17Cr ferritic stainless steel during high-temperature creep process
    Jiang, Mingkun
    Han, Ying
    Sun, Jiaqi
    Sun, Jiapeng
    Zu, Guoqing
    Chen, Hua
    Ran, Xu
    MATERIALS CHARACTERIZATION, 2021, 179
  • [38] Multi-twinned deformation and fracture characteristics of directional solidified Ti-45.5Al-5Nb-0.5Ta alloys during high-temperature rotary-bending fatigue process
    Zheng, Shaokai
    Shen, Jun
    Wang, Wei
    Zhao, Cong
    Wang, Xudong
    Zhao, Jiajun
    Li, Jiaxin
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2023, 876