Penetration resistance properties of glass fiber reinforced polypropylene composites with different ply angles

被引:1
作者
Zou, Guangping [1 ]
Wu, Songyang [1 ]
Chang, Zhongliang [1 ]
Liu, Yuhang [2 ]
Wang, Xuan [1 ]
机构
[1] Harbin Engn Univ, Coll Aerosp & Civil Engn, Bldg 11,Room 2045,Nan Tong St 145, Harbin 150001, Peoples R China
[2] Harbin Inst Technol, Sch Astronaut, Harbin, Peoples R China
基金
中国国家自然科学基金;
关键词
Fiber reinforced; polypropylene; composite; penetration performance; dynamic response; IMPACT RESPONSE; MECHANICAL-PROPERTIES; TRANSVERSE IMPACT; BEHAVIOR; PERFORMANCE; PARAMETERS; PLATES; DAMAGE; EPOXY;
D O I
10.1177/08927057221105049
中图分类号
TB33 [复合材料];
学科分类号
摘要
This paper mainly studies the dynamic response of composites with glass fiber as reinforcement and polypropylene resin as matrix under high-speed projectile penetration. The penetration effects of fiber unidirectional ply cross-ply and quasi-isotropic ply laminate were studied by using penetration velocities of 100-500 m/s. The effects of ply angle on ballistic limit velocity, target energy absorption rate and corresponding failure mode are analyzed. The correctness of the simulation model is verified by comparative experiments, and the ply angle of glass fiber reinforced polypropylene (GF/PP) composites is optimized. The results show that the energy absorption efficiency of the three kinds of laminated plates gradually decreases with the increase of the projectile incident velocity, and with the increase of the velocity, the absorption rate of the target plate gradually decreases tends to the same constant. The laminated plates with complex ply angles are simulated and analyzed, and the optimization results show that the ballistic limit velocity of fiber-reinforced composite laminates with ply angle of 30 degrees is the highest.
引用
收藏
页码:3403 / 3416
页数:14
相关论文
共 50 条
[31]   Mechanical and structural properties of glass fiber-reinforced polypropylene (PPGF) composites [J].
Kallel, Tasnim Kossentini ;
Taktak, Rym ;
Guermazi, Noamen ;
Mnif, Nizar .
POLYMER COMPOSITES, 2018, 39 (10) :3497-3508
[32]   Drilling damage of glass fiber reinforced polypropylene composites [J].
Wang F. ;
Guo H. ;
Jia Z. ;
Ma J. ;
Cheng D. ;
Hu H. .
Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 2018, 35 (08) :2023-2031
[33]   Banana/Glass Fiber-Reinforced Polypropylene Hybrid Composites: Fabrication and Performance Evaluation [J].
Samal, Sushanta K. ;
Mohanty, Smita ;
Nayak, Sanjay K. .
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2009, 48 (04) :397-414
[34]   Structure and properties of β-polypropylene reinforced by polypropylene fiber and polyamide fiber [J].
Liu, Qi ;
Li, Hui-hui ;
Yan, Shou-ke .
CHINESE JOURNAL OF POLYMER SCIENCE, 2014, 32 (04) :509-518
[35]   Crosslinked Continuous Glass Fiber-Reinforced Toughened Polypropylene Composites [J].
Gohs, Uwe ;
Girdauskaite, Lina ;
Peitzsch, Lutz ;
Rothe, Stefan ;
Zschech, Carsten ;
Heinrich, Gert ;
Roedel, Hartmut .
ADVANCED ENGINEERING MATERIALS, 2016, 18 (03) :409-416
[36]   A Novel Strategy for the Preparation of Bamboo Fiber Reinforced Polypropylene Composites [J].
Wang, Chuanbao ;
Ying, Sanjiu .
FIBERS AND POLYMERS, 2014, 15 (01) :117-125
[37]   Wear Properties of Glass Fiber Reinforced Polypropylene [J].
Yetistiren, Hulya ;
Zeren, Adalet ;
Sahin, Tulin .
KGK-KAUTSCHUK GUMMI KUNSTSTOFFE, 2012, 65 (03) :43-48
[38]   Effects of Process Parameters on the Mechanical Properties of Glass Fabric Reinforced Polypropylene Composites [J].
Suresh, S. ;
Kumar, V. S. Senthil .
POLYMER-KOREA, 2018, 42 (04) :594-602
[39]   Hollow glass microspheres/piassava fiber-reinforced homo- and co-polypropylene composites: preparation and properties [J].
Borges, Tamara E. ;
Almeida, Jose Humberto S., Jr. ;
Amico, Sandro C. ;
Amado, Franco D. R. .
POLYMER BULLETIN, 2017, 74 (06) :1979-1993
[40]   Comparison of the mechanical properties of chopped glass, carbon, and aramid fiber reinforced polypropylene [J].
Ari, Ali ;
Bayram, Ali ;
Karahan, Mehmet ;
Karagoz, Secgin .
POLYMERS & POLYMER COMPOSITES, 2022, 30