Penetration resistance properties of glass fiber reinforced polypropylene composites with different ply angles

被引:1
作者
Zou, Guangping [1 ]
Wu, Songyang [1 ]
Chang, Zhongliang [1 ]
Liu, Yuhang [2 ]
Wang, Xuan [1 ]
机构
[1] Harbin Engn Univ, Coll Aerosp & Civil Engn, Bldg 11,Room 2045,Nan Tong St 145, Harbin 150001, Peoples R China
[2] Harbin Inst Technol, Sch Astronaut, Harbin, Peoples R China
基金
中国国家自然科学基金;
关键词
Fiber reinforced; polypropylene; composite; penetration performance; dynamic response; IMPACT RESPONSE; MECHANICAL-PROPERTIES; TRANSVERSE IMPACT; BEHAVIOR; PERFORMANCE; PARAMETERS; PLATES; DAMAGE; EPOXY;
D O I
10.1177/08927057221105049
中图分类号
TB33 [复合材料];
学科分类号
摘要
This paper mainly studies the dynamic response of composites with glass fiber as reinforcement and polypropylene resin as matrix under high-speed projectile penetration. The penetration effects of fiber unidirectional ply cross-ply and quasi-isotropic ply laminate were studied by using penetration velocities of 100-500 m/s. The effects of ply angle on ballistic limit velocity, target energy absorption rate and corresponding failure mode are analyzed. The correctness of the simulation model is verified by comparative experiments, and the ply angle of glass fiber reinforced polypropylene (GF/PP) composites is optimized. The results show that the energy absorption efficiency of the three kinds of laminated plates gradually decreases with the increase of the projectile incident velocity, and with the increase of the velocity, the absorption rate of the target plate gradually decreases tends to the same constant. The laminated plates with complex ply angles are simulated and analyzed, and the optimization results show that the ballistic limit velocity of fiber-reinforced composite laminates with ply angle of 30 degrees is the highest.
引用
收藏
页码:3403 / 3416
页数:14
相关论文
共 50 条
[21]   Strain Rate Sensitive Properties of Glass Fiber Reinforced Polypropylene Composites [J].
Lu Xiong ;
Yang Xu-jing ;
Duan Shu-yong ;
Zheng Juan .
CAILIAO GONGCHENG-JOURNAL OF MATERIALS ENGINEERING, 2018, 46 (04) :146-151
[22]   Shrinkage Optimization in Talc- and Glass-Fiber-Reinforced Polypropylene Composites [J].
Ryu, Youngjae ;
Sohn, Joo Seong ;
Kweon, Byung Chul ;
Cha, Sung Woon .
MATERIALS, 2019, 12 (05)
[23]   Effect of fiber surface modifications on the properties of snake grass fiber reinforced polypropylene bio-composites [J].
Zaman, Haydar U. ;
Khan, Ruhul A. .
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2022, 36 (13) :1439-1457
[24]   Effect of Hollow Glass Microspheres with Different Contents and Types on Properties of Polypropylene Composites [J].
Zhu, Zhaolin ;
Wang, Jinxiang ;
Liu, Yin ;
Xian, Guiyang ;
Wang, Yan ;
Wu, Chongmei ;
Peng, Xiaobo ;
Fang, Yongwei ;
Kong, Ling Bing .
CHEMISTRYSELECT, 2022, 7 (48)
[25]   Physicomechanical Properties of Chemically Treated Palm Fiber Reinforced Polypropylene Composites [J].
Haque, Mominul ;
Islam, Saiful ;
Islam, Sakinul ;
Islam, Nazrul ;
Huque, Monimul ;
Hasan, Mahbub .
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2010, 29 (11) :1734-1742
[26]   Effects of different coupling agents on the mechanical and interfacial properties of oil palm fiber reinforced polypropylene composites [J].
Ramli, R. ;
Yunus, R. M. ;
Beg, M. D. H. ;
Alam, A. K. M. M. .
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2011, 30 (04) :301-308
[27]   Effect of Compatibilizer on the Properties of Areca-Fiber Reinforced Polypropylene Composites [J].
Venkatachalaiah, Madhushri Attihalli ;
Setty, Raju Nama Vasudeva ;
Johns, Jobish .
JOURNAL OF NATURAL FIBERS, 2022, 19 (17) :15261-15275
[28]   Investigation of impact resistance performance of carbon fiber reinforced polypropylene composites with different lamination to applicate fender parts [J].
Kwon, Dong-Jun ;
Kim, Neul-Sae-Rom ;
Jang, Yeong-Jin ;
Yang, Seong-Baek ;
Yeum, Jeong-Hyun ;
Jung, Ji-Hoon ;
Nam, Sang Yong ;
Park, Young-Bin ;
Ji, Wooseok .
COMPOSITES PART B-ENGINEERING, 2021, 215
[29]   Crystallization and mechanical properties of basalt fiber-reinforced polypropylene composites with different elastomers [J].
Sang, Lin ;
Zheng, Guojun ;
Hou, Wenbin ;
Yang, Xiaoli ;
Wei, Zhiyong .
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2018, 134 (03) :1531-1543
[30]   Direct injection molding of hybrid polypropylene/wood-fiber composites reinforced with glass fiber and carbon fiber [J].
Guo, Gangjian ;
Kethineni, Chinmai .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 106 (1-2) :201-209