Drying strategies of spent coffee grounds using refractance window method

The objective of this study was to evaluate, during the drying of spent coffee grounds, the application of pretreatments with ethanol and the application of ultrasound assisting the refractive window (RW) drying, and to compare with convective drying by hot air (AC). The effect on the kinetics parameters of the Fick and Page models were evaluated, as well as on the content of total phenolics and antioxidant capacity. For AC drying, samples of spent ground coffee were prepared in the form of fixed rectangular beds 0.7 cm high, which were placed on polyester sheets and pretreated up to 10 times sprayed with ethanol, then dried by AC at 80 degrees C and 0.8 m/s. For RW drying, the samples prepared in the same way as for AC were used. For this case, the application of ethanol as pretreatment and the use of ultrasound during process were tested. As results, regardless of the conditions applied, drying by RW was up to 50 % faster, evidenced in the highest values of effective diffusivity (from the Fick model) and the kinetic parameter (from the Page model). Regarding the treatments applied and their effect on the drying kinetics, any treatment had a significant effect on AC drying. On the contrary, the strategies applied in RW drying had significant effects, both the application of pretreatment with ethanol as well as the application of ultrasound assisting the process accelerated the drying kinetics. However, the treatment with ethanol and RW drying was the one that best preserved the phenolic compounds and the antioxidant capacity in the samples. Therefore, these strategies could be a good option to improve RW drying by accelerating the process and preserving the bioactive compounds in the spent coffee grounds for subsequent utilization.