Development of Al/Cu/SiC bimetallic nano-composite by friction stir spot welding

被引：61
作者：
Abdollahzadeh, Amin [1 ]
Bagheri, Behrouz [2 ]
Shamsipur, Ali [2 ]
机构：
[1] Shahid Chamran Univ Ahvaz, Fac Engn, Dept Mat Sci & Engn, Ahvaz, Iran
[2] Amirkabir Univ Technol, Dept Min & Met, Tehran, Iran
来源：
MATERIALS AND MANUFACTURING PROCESSES | 2023年 / 38卷 / 11期
关键词：
Welding; nanoparticles; microstructure; strength; hardness; nanocomposite; recrystallization; intermetallic; MICROSTRUCTURE; COPPER; AL; FSW;
D O I：
10.1080/10426914.2022.2157435
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A joint of aluminum to copper sheets with a nanoparticle interlayer was successfully achieved by friction stir spot welding (FSSW). Effects of SiC reinforcing particles on the microstructure and mechanical performances of the joints were studied. It turned out that the introduction of nanoparticles during FSSW causes the microstructure refinement in the joint area and it develops the interface characteristics. Moreover, continuous CuAl2, CuAl, and Al4Cu9 phases developed at the interface joint, and the thickness of the intermetallic compound (IMCs) layer in the bond interface was decreased during FSSW with the nanoparticle. The results also implied that the mechanical properties of FSSW-ed samples with SiC particles, such as strength, are higher than that of conventional FSSW-ed specimens. Based on hardness measurements, hardness values in the stir zone were much higher due to higher stir action and refined grains.
引用
收藏
页码：1416 / 1425
页数：10
相关论文
共 33 条
[1]   New method to enhance the mechanical characteristics of Al-5052 alloy weldment produced by tungsten inert gas [J].
Abbasi, Mahmoud ;
Givi, Mohammad ;
Bagheri, Behrouz .
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2020,
[2]   Mechanical, wear and corrosion behaviors of AZ91/SiC composite layer fabricated by friction stir vibration processing [J].
Abdollahzadeh, Amin ;
Bagheri, Behrouz ;
Abbasi, Mahmoud ;
Sharifi, Farzaneh ;
Ostovari Moghaddam, Ahmad .
SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES, 2021, 9 (03)
[3]   Comparison of the Weldability of AA6061-T6 Joint under Different Friction Stir Welding Conditions [J].
Abdollahzadeh, Amin ;
Bagheri, Behrouz ;
Abassi, Mahmoud ;
Kokabi, Amir Hossein ;
Moghaddam, Ahmad Ostovari .
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2021, 30 (02) :1110-1127
[4]   Effect of materials position on friction stir lap welding of Al to Cu [J].
Akbari, M. ;
Behnagh, R. Abdi ;
Dadvand, A. .
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2012, 17 (07) :581-588
[5]   Preparation of bimetallic nano-composite by dissimilar friction stir welding of copper to aluminum alloy [J].
Argesi, Farhad Bakhtiari ;
Shamsipur, Ali ;
Mirsalehi, Seyyed Ehsan .
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2021, 31 (05) :1363-1380
[6]   Investigation of SiC Nanoparticle Size and Distribution Effects on Microstructure and Mechanical Properties of Al/SiC/Cu Composite during the FSSW Process: Experimental and Simulation [J].
Bagheri, Behrouz ;
Shamsipur, Ali ;
Abdollahzadeh, Amin ;
Mirsalehi, Seyyed Ehsan .
METALS AND MATERIALS INTERNATIONAL, 2023, 29 (04) :1095-1112
[7]   Investigation into novel multipass friction stir vibration brazing of carbon steels [J].
Bagheri, Behrouz ;
Abbasi, Mahmoud ;
Sharifi, Farzaneh ;
Abdollahzadeh, Amin .
MATERIALS AND MANUFACTURING PROCESSES, 2022, 37 (08) :921-932
[8]   The role of vibration and pass number on microstructure and mechanical properties of AZ91/SiC composite layer during friction stir processing [J].
Bagheri, Behrouz ;
Abdollahzadeh, Amin ;
Sharifi, Farzaneh ;
Abbasi, Mahmoud .
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2022, 236 (05) :2312-2326
[9]   Numerical analysis of cooling and joining speed effects on friction stir welding by smoothed particle hydrodynamics (SPH) [J].
Bagheri, Behrouz ;
Abbasi, Mahmoud ;
Abdolahzadeh, Amin ;
Kokabi, Amir Hossein .
ARCHIVE OF APPLIED MECHANICS, 2020, 90 (10) :2275-2296
[10]   Numerical analysis of vibration effect on friction stir welding by smoothed particle hydrodynamics (SPH) [J].
Bagheri, Behrouz ;
Abdollahzadeh, Amin ;
Abbasi, Mahmoud ;
Kokabi, Amir Hossein .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 110 (1-2) :209-228
1234