Recyclable magnetic nickel ferrite-carboxymethyl cellulose-sodium alginate bio-composite for efficient removal of nickel ion from water

In waste water treatment, magnetic bio-composites are frequently investigated as an adsorbent recently due to their great capacity for adsorption and affordability. In this current work, an attempt has been made to develop spinel nickel ferrite-carboxymethyl cellulose (NiFCMC) composite and modified its surface by alginate polymer to form NiFCMC-Alg composite. Several techniques were utilized to characterize these adsorbents including Fourier transform infrared spectroscopy, x-ray diffraction, field emission scanning electron microscopy, energy-dispersive spectra, thermogravimetric analysis, vibration sample magnetometry and pH of point zero charge. These adsorbents were explored to check their potentiality to remove Ni (II) ions in aqueous medium on various parameters such as contact time, initial metal ion concentration, pH, adsorbent dose and temperature. The optimum time for establishment of equilibrium was 180 minutes at pH 8 with adsorbent dose of 0.1 g. Results of kinetic studies revealed that the best fit for the metal ion adsorption data was the Lagergren pseudo-second-order mode indicating the chemisorption nature. Likewise, the Langmuir isotherm model also showed good agreement with adsorption equilibrium data with maximum adsorption capacities 47.84 +/- 2.39 and 60.24 +/- 3.01 mg/g for NiFCMC and NiFCMC-Alg respectively. The calculated adsorption thermodynamic parameters confirmed the spontaneous nature of adsorption process. The regeneration efficiency of both adsorbents was studied for five cycles and showed significant results. This study has shown that NiFCMC and NiFCMC-Alg can be a good substitute for removing Ni (II) ions in aqueous medium. [GRAPHICS]