Interface enhancement and distribution of carbon fibers in injection welding

Injection welding is an excellent adhesive-free bonding method for thermoplastic resins, demonstrating outstanding connection effectiveness. The incorporation of carbon fibers (CFs) significantly enhances the weld shear strength at the injection interface. This study aims to investigate the reinforcement effect of CF-reinforced thermoplastic composites (CFRTP) during the injection welding process. And explore the influence of the amount of added CFs on the weld shear strength. Polyamide 6 (PA6)/CF composites with CF contents of 10 wt% and 30 wt% were subjected to injection welding for the first and second molding cycles, respectively. It was observed that the reinforcement effects varied considerably depending on the combinations studied. Under the optimal combination and process parameters, the weld shear strength of PA6/CF composites reached 63 MPa, equivalent to 90% of the shear strength (70 MPa) of the original PA6/CF material. Polarized light microscopy and scanning electron microscopy were utilized to analyze the distribution of CFs at the interface and the reinforcing mechanism during tensile fracture. The significance of maintaining uniform CF content during the welding process of PA6/CF composites was emphasized.Highlights Preparation of PA6 composite materials with different carbon fiber contents. Achieving high welding shear strength of composite materials through injection welding. Identified the optimal injection welding conditions to achieve the highest strength. The positive effect of specific fiber distribution on welding strength was analyzed. The distribution of carbon fibers in injection welding. image