Electrochemical Effects of the Hollow Structure Co3O4/MWCNT Interlayer Derived through ZIF-67 in Lithium-Sulfur Batteries

被引:3
作者
Choi, Sanghyeon [1 ]
Kim, In Kyeong [1 ]
Yang, Seung Hoon [1 ]
Go, Nak Gu [1 ]
Yoon, Woo Young [1 ]
机构
[1] Korea Univ, Dept Mat Sci & Engn, 1,5Ga Anam Dong, Seoul 136701, South Korea
基金
新加坡国家研究基金会;
关键词
CARBON NANOTUBES; PERFORMANCE; MOF; COMPOSITE; FRAMEWORK; HOST; CONVERSION; SEPARATOR; SULFIDE; CATHODE;
D O I
10.1149/1945-7111/acd817
中图分类号
O646 [电化学、电解、磁化学];
学科分类号
081704 ;
摘要
The self-standing ZIF-67 derived Co3O4@MWCNT interlayer is prepared without a binder and conductor. The hollow structure of ZIF-67 derived Co3O4 is confirmed through SEM and TEM analysis. XRD analysis confirms the synthesis of ZIF-67 and the subsequent formation of ligand-free Co3O4 after thermal decomposition. BET analysis also confirms a specific surface area of approximately 139.72 m(2) g(-2). Through polarization measurements, Co3O4 effectively reduces polarization by more than 22% compared to when it is not used. After 10 cycles, the capacity of the Co3O4@MWCNT cell is 1120.65 mAh g(-1), which is 315 mAh g(-1) higher than that of an MWCNT cell (805 mAh g(-1)). The Co3O4 promotes the conversion from Li2S4 to Li2S2 and Li2S, which leads to higher capacity. Moreover, the cycle stability improves by more than 28% by adsorbing more polysulfide through the hollow structure. Furthermore, it is confirmed that Co3O4@MWCNT exhibits approximately 33% less polarization compared to MWCNT even under high C-rate conditions (2 C rate). Various electrochemical characteristics and X-ray photoelectron spectroscopy (XPS) reveal that the hollow Co3O4 physically and chemically suppresses the shuttling phenomenon.
引用
收藏
页数:8
相关论文
共 53 条
  • [1] Bai SY, 2016, NAT ENERGY, V1, DOI [10.1038/nenergy.2016.94, 10.1038/NENERGY.2016.94]
  • [2] New insights into the limiting parameters of the Li/S rechargeable cell
    Barchasz, Celine
    Lepretre, Jean-Claude
    Alloin, Fannie
    Patoux, Sebastien
    [J]. JOURNAL OF POWER SOURCES, 2012, 199 : 322 - 330
  • [3] Bruce PG, 2012, NAT MATER, V11, P19, DOI [10.1038/NMAT3191, 10.1038/nmat3191]
  • [4] Maleimide-functionalized metal-organic framework for polysulfide tethering in lithium-sulfur batteries†
    Burns, David A.
    Benavidez, Angelica
    Buckner, Jessica L.
    Thoi, V. Sara
    [J]. MATERIALS ADVANCES, 2021, 2 (09): : 2966 - 2970
  • [5] Co3O4 nanoneedle arrays as a multifunctional "super-reservoir" electrode for long cycle life Li-S batteries
    Chang, Zhi
    Dou, Hui
    Ding, Bing
    Wang, Jie
    Wang, Ya
    Hao, Xiaodong
    MacFarlane, Douglas R.
    [J]. JOURNAL OF MATERIALS CHEMISTRY A, 2017, 5 (01) : 250 - 257
  • [6] Bamboo-like CO3O4 nanofiber as host materials for enhanced lithium-sulfur battery performance
    Chen, Yinxia
    Ji, Xianbing
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 777 : 688 - 692
  • [7] Flexible free-standing carbon nanotube films for model lithium-ion batteries
    Chew, Sau Yen
    Ng, See How
    Wang, Jiazhao
    Novak, Petr
    Krumeich, Frank
    Chou, Shu Lei
    Chen, Jun
    Liu, Hua Kun
    [J]. CARBON, 2009, 47 (13) : 2976 - 2983
  • [8] New Approaches for High Energy Density Lithium-Sulfur Battery Cathodes
    Evers, Scott
    Nazar, Linda F.
    [J]. ACCOUNTS OF CHEMICAL RESEARCH, 2013, 46 (05) : 1135 - 1143
  • [9] Fe-MOF derived jujube pit like Fe3O4/C composite as sulfur host for lithium-sulfur battery
    Fan, Lishuang
    Wu, Hexian
    Wu, Xian
    Wang, Maoxu
    Cheng, Junhan
    Zhang, Naiqing
    Feng, Yujie
    Sun, Kening
    [J]. ELECTROCHIMICA ACTA, 2019, 295 : 444 - 451
  • [10] Polysulfide immobilization and conversion on a conductive polar MoC@MoOx material for lithium-sulfur batteries
    Fang, Ruopian
    Zhao, Shiyong
    Sun, Zhenhua
    Wang, Da-Wei
    Amal, Rose
    Wang, Shaogang
    Cheng, Hui-Ming
    Li, Feng
    [J]. ENERGY STORAGE MATERIALS, 2018, 10 : 56 - 61