Determination of the Required Strength of Artificial Roof for the Underhand Cut-and-Fill Mine Using Field Measurements and Theoretical Analysis

被引:4
作者
Han, Bin [1 ]
Ji, Kun [2 ]
Wang, Jiandong [3 ]
Wang, Shibo [4 ]
Zhang, Peng [4 ]
Hu, Yafei [1 ]
机构
[1] Univ Sci & Technol Beijing, Civil & Resource Engn Sch, Beijing 100083, Peoples R China
[2] Dalian Univ Technol, Sch Civil Engn, Dalian 116024, Peoples R China
[3] Min Res Inst Baotou Steel Grp Corp, Baotou 014030, Peoples R China
[4] Jinchuan Grp Co Ltd, Jinchang 737100, Peoples R China
基金
国家重点研发计划;
关键词
underhand cut-and-fill mining; artificial roof; cemented paste backfill; required strength; field measurement; thick plate theory;
D O I
10.3390/su15010189
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
For the underhand cut-and-fill mining method, to ensure safe and economic mining, a key issue is to correctly determine the required strength of the artificial roof made of cemented paste backfill (CPB). However, the determination of the required strength is typically based on historical experience and analytical beam formulas, resulting in the obtained required strength being unsuitable for the actual situation. Therefore, in order to determine the required strength of the CPB roof reasonably and accurately, field measurements based on sensors were proposed and carried out in the Jinchuan mine, and then formulas based on thick plate theory were derived to verify the measured results. The results show that the required strength obtained by field measurement is 0.325 MPa and that obtained by thick plate theory is 0.304 MPa, with an error of 6.78% between them, verifying the accuracy of the measurements. However, the strength standard currently used by Jinchuan is 0.59 MPa, which far exceeds the optimal strength and results in many additional, unnecessary expenses. To ensure economical mining, the span of the drift was enlarged from 5.0 m to 6.0 m based on the results of the actual measurements and the current production status of the mine. The measurements show that the maximum cumulative subsidence of the drift roof is 11.69 mm and the maximum convergence deformation of the sidewalls is 8.34 mm, which indicates that the stability of the span-enlarged drift is satisfactory. Meanwhile, enlarging the drift span allows for a 20% increase in production capacity per mining cycle. This field measurement method and theoretical analysis model can be used as an efficient guide to facilitate the design of underhand cut-and-fill mining.
引用
收藏
页数:16
相关论文
共 39 条
  • [1] Stability Analysis of Paste Filling Roof by Cut and Fill Mining
    Chang, Qingliang
    Sun, Yifeng
    Leng, Qiang
    Liu, Zexu
    Zhou, Huaqiang
    Sun, Yuantian
    [J]. SUSTAINABILITY, 2021, 13 (19)
  • [2] In-situ remediation of phosphogypsum in a cement-free pathway: Utilization of ground granulated blast furnace slag and NaOH pretreatment
    Chen, Qiusong
    Sun, Shiyuan
    Wang, Yunmin
    Zhang, Qinli
    Zhu, Liming
    Liu, Yikai
    [J]. CHEMOSPHERE, 2023, 313
  • [3] Highly-efficient fluoride retention in on-site solidification/stabilization of phosphogypsum: Cemented paste backfill synergizes with poly-aluminum chloride activation
    Chen, Qiusong
    Zhang, Qi
    Wang, Yunmin
    Zhang, Qinli
    Liu, Yikai
    [J]. CHEMOSPHERE, 2022, 309
  • [4] The carbon uptake and mechanical property of cemented paste backfill carbonation curing for low concentration of CO2
    Chen, Qiusong
    Zhu, Liming
    Wang, Yunmin
    Chen, Jie
    Qi, Chongchong
    [J]. SCIENCE OF THE TOTAL ENVIRONMENT, 2022, 852
  • [5] Cheng X.S., 1989, APPL THEORY PLATES S
  • [6] Fan W.L., 2013, THESIS CENTRAL S U C
  • [7] Fan W.L., 2013, MIN METALL ENG, V4, P30
  • [8] Novel Underhand Cut-and-Fill Stoping Method and Mechanical Analysis of Overlying Backfill
    Feng, Fan
    Li, Diyuan
    Li, Xibing
    Guo, Zhongping
    Wang, Shaofeng
    Chen, Ying
    [J]. INTERNATIONAL JOURNAL OF GEOMECHANICS, 2017, 17 (07)
  • [9] [冯帆 Feng Fan], 2016, [采矿与安全工程学报, Journal of Mining & Safety Engineering], V33, P1089
  • [10] Damage constitutive model and strength criterion of cemented paste backfill based on layered effect considerations
    Fu, Jianxin
    Wang, Jie
    Song, Weidong
    [J]. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2020, 9 (03): : 6073 - 6084