DETERMINISTIC SEISMIC DAMAGE ANALYSIS FOR CONCRETE GRAVITY DAMS: A CASE STUDY OF OUED FODDA DAM

被引:1
|
作者
Ouzandja, Djamel [1 ]
Berrabah, Amina Tahar [2 ]
机构
[1] Univ Msila, Fac Technol, Dept Civil Engn, Lab Mat & Mech Struct LMMS, PB 166, Msila 28000, Algeria
[2] Univ Ain Temouchent, Dept Civil Engn, Smart Struct Lab, Route Sidi Bel Abbes BP 284, Ain Temouchent, Algeria
关键词
concrete dam; seismic damage; adhesive joints; frictional joints; smeared crack approach; ARCH DAMS; INCLUDING CONTRACTION; EARTHQUAKE ANALYSIS; FRACTURE-ANALYSIS; MODEL;
D O I
10.2478/ama-2023-0039
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
One of the major dangers for seismic damage of concrete dams is the propagation of cracks in dam concrete. The present study undertakes a numerical investigation of the seismic damage for Oued Fodda concrete gravity dam, located in the northwest of Algeria, considering the impacts of properties of joints along the dam-foundation rock interface and cross-stream earthquake excitation. Three-dimensional transient analyses for coupled dam-foundation rock system are carried out using Ansys software. The hydrodynamic effect of reservoir fluid is modelled using the added mass approach. The smeared crack approach is utilised to present the seismic damage of dam concrete using the Willam and Warnke failure criterion. The dam-foundation rock interface joints are presented with two ways, adhesive joints and frictional joints. The Drucker-Prager model is considered for dam concrete in nonlinear analyses. Consideration of the study results indicates that the frictional joints model can reduce the seismic response and damage hazard of the dam body to a better extent compared with the adhesive joints model. Furthermore, the application of cross-stream earthquake excitation reveals the significant effect on cracking response of the dam in the two models of joints.
引用
收藏
页码:347 / 356
页数:10
相关论文
共 50 条
  • [21] Research and Application of a Seismic Damage Classification Method of Concrete Gravity Dams Using Displacement in the Crest
    Lu, Xiang
    Pei, Liang
    Chen, Jiankang
    Wu, Zhenyu
    Chen, Chen
    APPLIED SCIENCES-BASEL, 2020, 10 (12):
  • [22] Seismic performance sensitivity and uncertainty analysis of gravity dams
    Alembagheri, M.
    Seyedkazemi, M.
    EARTHQUAKE ENGINEERING & STRUCTURAL DYNAMICS, 2015, 44 (01): : 41 - 58
  • [23] Earthquake performance assessment of concrete gravity dams subjected to spatially varying seismic ground motions
    Huang, Junjie
    Zerva, Aspasia
    STRUCTURE AND INFRASTRUCTURE ENGINEERING, 2014, 10 (08) : 1011 - 1026
  • [24] Behavior of a concrete gravity dam during an earthquake - A case study of the Dondo Dam
    Sawada, T
    PROCEEDINGS OF THE JAPAN ACADEMY SERIES B-PHYSICAL AND BIOLOGICAL SCIENCES, 1996, 72 (02): : 28 - 33
  • [25] Effect of seismic wave propagation in massed medium on rate-dependent anisotropic damage growth in concrete gravity dams
    Daneshyar, Alireza
    Mohammadnezhad, Hamid
    Ghaemian, Mohsen
    FRONTIERS OF STRUCTURAL AND CIVIL ENGINEERING, 2021, 15 (02) : 346 - 363
  • [26] On the Seismic Fragility Assessment of Concrete Gravity Dams in Eastern Canada
    Segura, Rocio
    Bernier, Carl
    Monteiro, Ricardo
    Paultre, Patrick
    EARTHQUAKE SPECTRA, 2019, 35 (01) : 211 - 231
  • [27] Geometrical dimensions effects on the seismic response of concrete gravity dams
    Sevim, Baris
    ADVANCES IN CONCRETE CONSTRUCTION, 2018, 6 (03) : 269 - 283
  • [28] Comparative study of the seismic performance of earth dams-case of Ouarkiss dam
    Seghir, Tarek
    Fourar, Fatima Zohra
    Zeroual, Abdelatif
    Fourar, Ali
    Massouh, Fawaz
    MODELING EARTH SYSTEMS AND ENVIRONMENT, 2024, 10 (01) : 1229 - 1251
  • [29] Crack Width - Seismic Intensity Relationships for Concrete Gravity Dams
    Soysal, Berat Feyza
    Arici, Yalin
    JOURNAL OF EARTHQUAKE ENGINEERING, 2024, 28 (02) : 565 - 581
  • [30] A probabilistic method for the seismic assessment of existing concrete gravity dams
    Lupoi, Alessio
    Callari, Carlo
    STRUCTURE AND INFRASTRUCTURE ENGINEERING, 2012, 8 (10) : 985 - 998