FEM STUDY OF A SYNCHRONOUS MOTOR WITH DIFFERENT PERMANENT MAGNET TOPOLOGIES

被引:0
|
作者
Craiu, Ovidiu [1 ]
Ichim, Teodor Ionut [2 ]
Popescu, Liviu [1 ]
机构
[1] Univ Politehn Bucuresti, Fac Elect Engn, Bucharest, Romania
[2] ICPE SA, Messico, Romania
来源
UNIVERSITY POLITEHNICA OF BUCHAREST SCIENTIFIC BULLETIN SERIES C-ELECTRICAL ENGINEERING AND COMPUTER SCIENCE | 2023年 / 85卷 / 01期
关键词
permanent magnet synchronous motor; finite element method; back electromotive force; electromagnetic torque; MACHINES; SURFACE;
D O I
暂无
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
The paper presents a study of a Permanent Magnet Synchronous Motor (PMSM) with 10 poles and 12 slots having different permanent magnet configurations. Bread loaf surface mounted magnets, radially embedded in the rotor, internal magnets, or Halbach magnets distribution were modeled with the professional software COMSOL Multiphysics. The influence of the different motor topologies upon the shape of the motor phase and line-to-line back EMF and load voltages, as well as on the torque ripple and cogging torque amplitude is analyzed. The Finite Element Method (FEM) quasi-stationary models were coupled with the stator circuit equations to simulate the sinusoidal current supply of the motor. The results are mainly qualitative, the purpose is to assist in motor design strategy and show some of the complexity of the choices in such a process.
引用
收藏
页码:261 / 274
页数:14
相关论文
共 50 条
  • [1] FEM STUDY OF A SYNCHRONOUS MOTOR WITH DIFFERENT PERMANENT MAGNET TOPOLOGIES
    Craiu, Ovidiu
    Ichim, Teodor Ionuț
    Popescu, Liviu
    UPB Scientific Bulletin, Series C: Electrical Engineering and Computer Science, 2023, 85 (01): : 261 - 274
  • [2] A FEM Analysis for a 9/10 Pole Permanent Magnet Synchronous Motor
    Florin, Lazar
    Simion, Alecsandru
    Livadaru, Leonard
    2014 INTERNATIONAL CONFERENCE ON OPTIMIZATION OF ELECTRICAL AND ELECTRONIC EQUIPMENT (OPTIM), 2014, : 409 - 414
  • [3] FEM based simulation of a permanent magnet synchronous motor performance characteristics
    Petkovska, L.
    Cvetkovski, G.
    IPEMC 2006: CES/IEEE 5TH INTERNATIONAL POWER ELECTRONICS AND MOTION CONTROL CONFERENCE, VOLS 1-3, CONFERENCE PROCEEDINGS, 2006, : 254 - +
  • [4] Performance Analysis of Different Rotor Topologies in Permanent Magnet Motor
    Trajkovski, Dimitar
    Cvetkovski, Goga
    17TH IEEE INTERNATIONAL CONFERENCE ON SMART TECHNOLOGIES - IEEE EUROCON 2017 CONFERENCE PROCEEDINGS, 2017, : 411 - 416
  • [5] HYBRID ANALYTICAL - FEM ANALYSIS OF SINGLE PHASE PERMANENT MAGNET SYNCHRONOUS MOTOR
    Petkovska, Lidija
    Cvetkovski, Goga
    EUROCON 2009: INTERNATIONAL IEEE CONFERENCE DEVOTED TO THE 150 ANNIVERSARY OF ALEXANDER S. POPOV, VOLS 1- 4, PROCEEDINGS, 2009, : 709 - 716
  • [6] Permanent magnet synchronous linear motor thrust and normal force FEM calculation
    Tsinghua Univ, Beijing, China
    Qinghua Daxue Xuebao/Journal of Tsinghua University, 2000, 40 (05): : 20 - 23
  • [7] Analysis of dynamic characteristics of permanent magnet linear synchronous motor using FEM
    Kwon, BI
    Rhyu, SH
    Woo, KI
    Park, SC
    NON-LINEAR ELECTROMAGNETIC SYSTEMS: ADVANCED TECHNIQUES AND MATHEMATICAL METHODS, 1998, 13 : 645 - 648
  • [8] Comparative Study of Different Control Strategies in Permanent Magnet Synchronous Motor Drives
    Biyani, Vishesh
    Jinesh, R.
    Eswar, Tharani T. A.
    Sourya, Sithartha V. S.
    Pinkymol, K. P.
    PROCEEDINGS OF 2021 5TH INTERNATIONAL CONFERENCE ON CONDITION ASSESSMENT TECHNIQUES IN ELECTRICAL SYSTEMS (IEEE CATCON 2021), 2021, : 275 - 281
  • [9] Electromagnetic performance and electromagnetic vibration noise analysis of different rotor topologies of interior permanent magnet synchronous motor
    Xie Y.
    Xin W.
    Cai W.
    Fan Y.-J.
    Dianji yu Kongzhi Xuebao/Electric Machines and Control, 2023, 27 (01): : 110 - 119
  • [10] Thermal analysis of a large permanent magnet synchronous motor for different permanent magnet rotor configurations
    Negrea, M
    Rosu, M
    IEMDC 2001: IEEE INTERNATIONAL ELECTRIC MACHINES AND DRIVES CONFERENCE, 2001, : 777 - 781