Flow Behavior and Processing Map for Hot Deformation of W-3Re-5HfC Alloy

被引：2

作者：

Li, Yanchao ^{[1
]}

Zhang, Wen ^{[1
]}

Lin, Xiaohui ^{[1
,2
]}

Li, Jianfeng ^{[1
]}

Xu, Hailong ^{[1
]}

机构：

[1] Northwest Inst Nonferrous Met Res, Refractory Mat Res Cent, Xian 710016, Peoples R China

[2] Xian Univ Technol, Sch Mat Sci & Engn, Xian 710048, Peoples R China

来源：

JOM | 2023年 / 75卷 / 11期

关键词：

DYNAMIC RECRYSTALLIZATION; MICROSTRUCTURE; SUPERALLOY; TUNGSTEN; MODEL;

D O I：

10.1007/s11837-023-05788-5

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The hot deformation behavior of W-3Re-5HfC alloy was investigated by compression at the temperature range of 1200-1500 degrees C and the strain rate range of 0.001-1 s(-1) on a Gleeble-1500D thermal simulator. The results show that the flow stress increases with increasing strain rates or decreasing deformation temperature. The deformation temperature and strain rates affect the flow behavior, exhibiting typical hardening, softening and steady stages. The constitutive equation was established based on the experimental data. The apparent activation energy Q is estimated to be 361 kJ mol(-1). Hot processing maps have been constructed at the true strain of 0.1 and 0.6. Moreover, the areas of 1200-1300 degrees C/0.001-0.1 s(-1) and 1400-1500 degrees C/0.1-1 s(-1) are identified as instability area. Dynamic recovery and dynamic recrystallization occur in the stable area 1500 degrees C/1 s(-1), and the mechanism of the stable area is dominated by dynamic recovery and grain growth.

引用

页码：4739 / 4748

页数：10

共 29 条

[11] Microstructure and high temperature mechanical properties of advanced W-3Re alloy reinforced with HfC particles [J].

Li, Yanchao ;

Zhang, Wen ;

Li, Jianfeng ;

Lin, Xiaohui ;

Gao, Xuanqiao ;

Wei, Fuzhi ;

Zhang, Guojun ;

Li, Laiping .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 814

[12] Flow behavior and processing map for hot deformation of W-1.5ZrO2 alloy [J].

Li, Zhou ;

Chen, Yunbo ;

Wei, Shizhong ;

Xiao, Fangnao ;

Siyal, Sajid Hussain ;

Xu, Liujie .

JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 802 :118-128

[13] Investigating active slip planes in tantalum under compressive load: Crystal plasticity and slip trace analyses of single crystals [J].

Lim, Hojun ;

Carroll, Jay D. ;

Michael, Joseph R. ;

Battaile, Corbett C. ;

Chen, Shuh Rong ;

Lane, J. Matthew D. .

ACTA MATERIALIA, 2020, 185 :1-12

[14] Microstructure and texture evolution of a near-α titanium alloy during hot deformation [J].

Lin, Peng ;

Feng, Aihan ;

Yuan, Shijian ;

Li, Geping ;

Shen, Jun .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 563 :16-20

[15] Dynamic materials model: Basis and principles - Reply [J].

Prasad, YVRK .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1996, 27 (01) :235-236

[16]

Prasad YVRK, 1998, INT MATER REV, V43, P243, DOI 10.1179/095066098790105618

[17]

Prasad YVRK., 1883, METALL MATER TRANS A, V15, P1984

[18] Interaction between texture evolution and dynamic recrystallization of extruded AZ80 magnesium alloy during hot deformation [J].

Qin, D. H. ;

Wang, M. J. ;

Sun, C. Y. ;

Su, Z. X. ;

Qian, L. Y. ;

Sun, Z. H. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 788

[19] ELEVATED-TEMPERATURE SOFTENING OF PROGRESSIVELY ANNEALED AND SINTERED W-RE ALLOYS [J].

RAMALINGAM, ML ;

JACOBSON, DL .

JOURNAL OF THE LESS-COMMON METALS, 1986, 123 :153-167

[20] Effect of Rhenium on the Dislocation Core Structure in Tungsten [J].

Romaner, Lorenz ;

Ambrosch-Draxl, Claudia ;

Pippan, Reinhard .

PHYSICAL REVIEW LETTERS, 2010, 104 (19)

← 1 2 3 →