Effect of a new upsetting process with large height-to-diameter ratio on the microstructure of Mg-Gd-Y-Zn-Zr alloy

被引：3
作者：
Ye, Yugang [1 ]
Liu, Chao [2 ]
Xue, Yong [2 ]
机构：
[1] ShanXi Inst Technol, Dept Mech Engn, Yangquan 045000, Peoples R China
[2] North Univ China, Sch Mat Sci & Engn, Taiyuan 030051, Peoples R China
来源：
MATERIALS LETTERS | 2023年 / 339卷
基金：
中国国家自然科学基金;
关键词：
Mg-Gd-Y-Zn-Zr; Severe plastic deformation; Upsetting; Dynamic recrystallization;
D O I：
10.1016/j.matlet.2023.134047
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this study, a new upsetting process with large height-to-diameter ratio is proposed, which breaks the limitation of the traditional upsetting process on the height-to-diameter ratio of the billet. The Mg-9.5Gd-4Y-2.2Zn-0.5Zr (wt.%) alloy bar with a height-to-diameter ratio of 6.5 was successfully upset and its microstructure evolution was investigated. The alloy underwent dynamic recrystallization (DRX) during upsetting, and the microstructure refinement was obvious, with the highest recrystallization ratio of 46.3 % in the center of the billet and the average grain size of 20.2 mu m. The basal texture was roughly parallel to the metal flow lines in each region, and weakened as the recrystallization rate increases.
引用
收藏
页数：4
相关论文
共 50 条
[41]   Effect of trace zinc on the microstructure and mechanical properties of extruded Mg-Gd-Y-Zr alloy [J].
Chi, Y. Q. ;
Xu, C. ;
Qiao, X. G. ;
Zheng, M. Y. .
JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 789 :416-427
[42]   A new insight into LPSO phase transformation and mechanical properties uniformity of large-scale Mg-Gd-Y-Zn-Zr alloy prepared by multi-pass friction stir processing [J].
Guan, Xiaohu ;
Wang, Wen ;
Zhang, Ting ;
Peng, Pai ;
Liu, Qiang ;
Han, Peng ;
Qiao, Ke ;
Cai, Jun ;
Wang, Liqiang ;
Wang, Kuaishe .
JOURNAL OF MAGNESIUM AND ALLOYS, 2024, 12 (05) :2041-2056
[43]   Microstructural evolution and enhanced mechanical properties of Mg-Gd-Y-Zn-Zr alloy via centrifugal casting, ring-rolling and aging [J].
Ma, Zhenduo ;
Li, Guo ;
Peng, Qiang ;
Peng, Xiaodong ;
Chen, Daolun ;
Zhang, Hanzhu ;
Yang, Yan ;
Wei, Guobing ;
Xie, Weidong .
JOURNAL OF MAGNESIUM AND ALLOYS, 2022, 10 (01) :119-128
[44]   The high-temperature deformation and microstructural evolution mechanism of Mg-Gd-Y-Zn-Zr alloy formed by CMT arc additive forming [J].
Zhao, Zhanyong ;
Wang, Jianbin ;
Du, Wenbo ;
Bai, Peikang ;
Wang, Liqing ;
Zhang, Zhen ;
Huang, Zhiquan .
VIRTUAL AND PHYSICAL PROTOTYPING, 2023, 18 (01)
[45]   Unraveling the effect of deformation-induced phase transformation on microstructure and micro-texture evolution of a multi-axially forged Mg-Gd-Y-Zn-Zr alloy containing the LPSO phase [J].
Ramezani, S. M. ;
Zarei-Hanzaki, A. ;
Salandari-Rabori, A. ;
Abedi, H. R. ;
Minarik, P. ;
Mathis, K. ;
Fekete, K. Horvath .
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2021, 15 :2088-2101
[46]   Effect of Hydrostatic Pressure on LPSO Kinking and Microstructure Evolution of Mg-11Gd-4Y-2Zn-0.5Zr Alloy [J].
Zheng, Ce ;
Chen, Shuai-Feng ;
Wang, Rui-Xue ;
Zhang, Shi-Hong ;
Cheng, Ming .
ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2021, 34 (02) :248-264
[47]   Influence of Hot Extrusion Process on Microstructure and Mechanical Properties of Mg-Zn-Y-Zr Magnesium Alloy [J].
Du Zhiming ;
Wang Dayu ;
Zhang Hongjuan .
RARE METAL MATERIALS AND ENGINEERING, 2018, 47 (06) :1655-1661
[48]   Hot deformation behavior and microstructure evolution of a Mg–Gd–Nd–Y–Zn alloy [J].
Xiu-Li Hou ;
Yan Li ;
Peng Lv ;
Jie Cai ;
Le Ji ;
Qing-Feng Guan .
Rare Metals, 2016, 35 :532-536
[49]   Hot deformation behavior and microstructure evolution of a Mg–Gd–Nd–Y–Zn alloy [J].
Xiu-Li Hou ;
Yan Li ;
Peng Lv ;
Jie Cai ;
Le Ji ;
Qing-Feng Guan .
RareMetals, 2016, 35 (07) :532-536
[50]   Hot deformation and dynamic recrystallization of Mg-Gd-Y-Zn-Zr alloy containing high volume fraction 18R-LPSO phase [J].
Hu, Liqiang ;
Wang, Jianli ;
Zheng, Pengcheng ;
Wang, Ke ;
Wang, Yili ;
Liu, Jiliang ;
Wang, Liying ;
Wang, Ding ;
Yang, Zhong .
JOURNAL OF ALLOYS AND COMPOUNDS, 2024, 1003
12345