Dual-phase synergistic deformation characteristics and strengthening mechanism of AlCoCrFeNi2.1 eutectic high entropy alloy fabricated by laser powder bed fusion

被引：29

作者：

Tang, Xu ^{[1
,2
]}

Zhang, Hao ^{[1
,3
]}

Zhu, Zhengwang ^{[1
]}

Xue, Peng ^{[1
,3
]}

Wu, Lihui ^{[1
,3
]}

Liu, Fengchao ^{[1
]}

Ni, Dingrui ^{[1
]}

Xiao, Bolv ^{[1
]}

Ma, Zongyi ^{[1
,3
]}

机构：

[1] Chinese Acad Sci, Shichangxu Innovat Ctr Adv Mat, Inst Met Res, Shenyang 110016, Peoples R China

[2] Univ Sci & Technol China, Sch Mat Sci & Engn, Shenyang 110016, Peoples R China

[3] Chinese Acad Sci, Inst Met Res, Key Lab Nucl Mat & Safety Assessment, Shenyang 110016, Peoples R China

来源：

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY | 2023年 / 150卷

基金：

中国国家自然科学基金;

关键词：

Laser powder bed fusion; Remelting; Eutectic high entropy alloy; Microstructure; Deformation mechanism; CO-SB; MICROSTRUCTURE; DUCTILITY; SOLIDIFICATION; GROWTH;

D O I：

10.1016/j.jmst.2022.11.045

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Eutectic high entropy alloy (EHEA) possesses promising prospects for industrial application due to its controllable and near-equilibrium dual-phase structure. Due to the advantages of high material utiliza-tion, efficient production, and design freedom, the laser powder bed fusion (LPBF) technique provides a new path to prepare EHEA components with complex structure and excellent performance. In this study, near fully dense AlCoCrFeNi2.1 samples were obtained by adjusting the process parameters of LPBF. Con-sidering the balling phenomenon and powder splashing during the LPBF process, laser remelting was selected as an optimized scanning strategy to further improve the forming quality of AlCoCrFeNi2.1. The microstructure of remelted AlCoCrFeNi2.1 sample exhibited regular eutectic lamellae consisting of nano-scale face-centered-cubic (FCC) and B2 phases, in which the FCC phase accounted for a higher proportion. By investigating the tensile behavior and deformation mechanism, it was revealed that the ultrafine eu-tectic lamellae could induce a strong dual-phase synergistic strengthening, thereby significantly improv-ing the strength of the sample. Compared with the vacuum induction melted (VIM) sample, the remelted sample showed a 54% increase in ultimate tensile strength (UTS-1518 MPa) and a 130% increase in yield strength (YS-1235 MPa) with reasonable plasticity. This study indicates that by combining the design and manufacturing freedom of LPBF with the EHEA, it is expected to fabricate high-property 3D EHEA parts, expanding the application field of EHEA. (c) 2023 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.

引用

页码：75 / 85

页数：11