A theoretical calculation method of seismic shear key pounding based on continuum model

The evolution of shear key design for bridges is accompanied by research on structural earth-quake resistance. However, the vast majority of pounding forces, responses, and corresponding data for the study and design of shear keys have been based on expensive experimentalism and imprecise empiricism approaches for decades. Hence, strengthening theoretical study on seis-mic performance of shear key is essential. In this paper, a "Beam-Spring-Beam + Concentrated Mass " continuum dynamic model is proposed. Meanwhile, the transient wave function expansion method and the mode superposition method are applied to determine the analytical expression of the dynamic response from the girder and pier system (pier and cap beam). Furthermore, the combined transient internal force method and Duhamel integration method are introduced to assess the elastic pounding process. Through programming and numerical analysis, a series of pounding response data related to the shear key under various working circumstances will be explored. As mentioned above, the proposed theoretical method can optimize shear key design and boost the reliability of seismic limiting devices in the future.center dot Establishing a feasible "Beam-Spring-Beam + Concentrated Mass " continuum model of girders and piers based on a two-span continuous girder bridge.center dot Deriving the analytical solutions of responses by conducting the response equations under horizontal seismic excitation (containing orthonormality verification).center dot Simulating the pounding process by embedding elastic pounding calculation methods into Continuum Model.