Behaviour of nickel coatings made by brush plating technology in conditions of cavitation erosion and corrosion

被引:15
作者
Krella, Alicja K. [1 ]
Grzes, Jaroslaw [2 ]
Erbe, Andreas [3 ]
Folstad, Marthe [3 ]
机构
[1] Polish Acad Sci, Inst Fluid Flow Machinery, Gdansk, Poland
[2] Warsaw Univ Technol, Inst Mfg Technol, Warsaw, Poland
[3] Norwegian Univ Sci & Technol, Dept Mat Sci & Engn, Trondheim, Norway
关键词
Brush plating; Cavitation erosion; Nickel coating; Coating structure; Electrochemical properties; STAINLESS-STEEL; TIN COATINGS; RESISTANCE; MICROSTRUCTURE; PERFORMANCE; ALLOYS; WEAR;
D O I
10.1016/j.wear.2023.204998
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
The basic hypothesis of the research was that the structure of the coating, i.e. the type of defects, affects the mechanical and electrochemical properties, as well as the resistance to cavitation erosion and corrosion. For this purpose, nickel coatings produced by brush-plating technology using two different electrolytes and deposited on X20Cr13 steel were tested. The electrolytes affected the structure and properties of the coatings: one coating had a network of cracks, and the second one had a "cauliflower-like" structure. The hardness and Young's modulus of both coatings were investigated under multi-cycle loading modes. Cavitation erosion resistance was tested in a cavitation tunnel equipped with a barricade system at an inlet pressure of 600 kPa and outlet pressure of 120 kPa. Both nickel coatings protected the substrate against cavitation erosion. The lowest rate of cavitation erosion had a coating with a network of cracks and high hardness. Microscopic examinations showed no influence of the net of cracks on the degradation process. Electrochemical tests confirmed the better corrosion resistance of the compact coating. The compact coating had about an order of magnitude lower corrosion potential and about 100 mV higher corrosion current density than that of the agglomerate coating. The agglomerate coating had electrochemical parameters comparable to the substrate.
引用
收藏
页数:15
相关论文
共 50 条
  • [41] Corrosion and wear behaviour of nickel dispersion coatings with nano particles
    Steinhäuser, S
    Lampke, T
    Wielage, B
    Jakob, C
    Erler, F
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2003, 34 (07) : 633 - 640
  • [42] SALT SPRAY CORROSION BEHAVIOUR OF CrN COATINGS DEPOSITED BY ARC ION PLATING
    Wan Xiansong
    Shi Yuying
    Ma Jun
    Li Haiqing
    Gong Jun
    Sun Chao
    ACTA METALLURGICA SINICA, 2010, 46 (05) : 600 - 606
  • [43] Synergistic effect of ultrasonic cavitation erosion and corrosion of WC-CoCr and FeCrSiBMn coatings prepared by HVOF spraying
    Hong, Sheng
    Wu, Yuping
    Zhang, Jianfeng
    Zheng, Yugui
    Zheng, Yuan
    Lin, Jinran
    ULTRASONICS SONOCHEMISTRY, 2016, 31 : 563 - 569
  • [44] Evaluation of the Corrosion Erosion by Cavitation of Multilayer Coatings Type Binary, Ternary and Quaternary Deposited on Steel AISI 4140
    Aperador, W.
    Ruz, E.
    Mejia, A.
    INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2014, 9 (10): : 5722 - 5731
  • [45] A study on the corrosion and erosion behavior of electroless nickel and TiAlN/ZrN duplex coatings on ductile iron
    Lin, Chung-Kwei
    Hsu, Cheng-Hsun
    Cheng, Yin-Hwa
    Ou, Keng-Liang
    Lee, Sheng-Long
    APPLIED SURFACE SCIENCE, 2015, 324 : 13 - 19
  • [46] Advanced cavitation erosion-corrosion resistance of nickel-aluminum bronze prepared by directed energy deposition
    Xu, Cheng
    Peng, Yong
    Chen, Liang-Yu
    Zhang, Tian-Yang
    Cheng, Jing-Jing
    Wang, Ke-Hong
    CORROSION SCIENCE, 2024, 231
  • [47] Impact of the multilayer approach on the tribocorrosion behaviour of nanocrystalline electroless nickel coatings obtained by different plating modes
    Salicio-Paz, A.
    Dalmau, A.
    Grande, H.
    Iriarte, A.
    Sort, J.
    Pellicer, E.
    Fornell, J.
    Garcia-Lecina, E.
    WEAR, 2020, 456
  • [48] Corrosion and Cavitation Erosion Behaviours of Cast Nickel Aluminium Bronze in 3.5% NaCl Solution with Different Sulphide Concentrations
    Song, Qi-Ning
    Xu, Nan
    Tong, Yao
    Huang, Chen-Ming
    Sun, Shou-Yu
    Xu, Chen-Bo
    Bao, Ye-Feng
    Jiang, Yong-Feng
    Qiao, Yan-Xin
    Zhu, Zhi-Yuan
    Wang, Zheng-Bin
    ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2019, 32 (12) : 1470 - 1482
  • [49] Dual Ni/Ni-Co electrodeposited coatings for improved erosion-corrosion behaviour
    Hasanpour, P.
    Salehikahrizsangi, P.
    Raeissi, K.
    Santamaria, M.
    Calabrese, L.
    Proverbio, E.
    SURFACE & COATINGS TECHNOLOGY, 2019, 368 : 147 - 161
  • [50] Wear, corrosion and cavitation erosion behavior of WC-reinforced FeCrNiMnAl ceramic-high entropy alloy composite coatings by laser cladding
    Yu, D. T.
    Wang, R.
    Wu, C. L.
    Wang, Z. . Z.
    Zhao, X. B.
    Zhang, S.
    Zhang, C. . H.
    Tao, X. P.
    CERAMICS INTERNATIONAL, 2024, 50 (24) : 55790 - 55800