A matching design co-enhancing thermal barrier and thermal cyclic performances of sintering-resistant coatings

Sintering-induced healing of intrinsic micropores is the main cause of thermal insulation degradation in plasma-sprayed thermal barrier coatings (TBCs). Although large pores can effectively retain the thermal-insulation performance, they can lower the mechanical performance during thermal cyclic tests. Therefore, balancing the tradeoff between the thermal and mechanical performances is a challenging task. Herein, sintering-resistant coatings were achieved through a matching design that co-enhances the thermal insulation and thermal cycling span. TBCs with different contents of sintering-resistant pores were prepared. The thermal-insulation performance was found to be positively correlated with the contents of sintering-resistant pores. However, in thermal cyclic tests, the lifespan increased as the pore content increased from 0 vol% to 20 vol% but drastically decreased as the pore content increased further above 20 vol%. Next, the competing effects of the newly formed pores on the crack driving force and fracture toughness, which might hasten TBC failure, are discussed. Based on the critical pore content, the matching design enhances the thermal insulation and lifespan of the resultant TBCs by 50% and 40%, respectively, from those of conventional TBCs. Therefore, the sintering-resistant structure is expected to considerably contribute to next-generation applications of TBCs.