Formability Behavior of the Ultrafine Grained Thin-Walled Tubes During Square-Sectional Hydroforming Process

被引：0

作者：

Abdolvand, H. ^{[1
]}

Ensafi, M. ^{[2
]}

Faraji, G. ^{[2
]}

机构：

[1] Louisiana State Univ, Mech & Ind Engn Dept, Baton Rouge, LA 70803 USA

[2] Univ Tehran, Coll Engn, Sch Mech Engn, Tehran 111554563, Iran

来源：

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS | 2023年 / 76卷 / 10期

关键词：

UFG tube; Severe plastic deformation; PTCAP; Hydroforming process; MECHANICAL-PROPERTIES; MICROSTRUCTURE; CORNER; PRESSURE;

D O I：

10.1007/s12666-023-02969-3

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

In the present study, formability of the ultrafine grained (UFG) Cu-Zn tubes were investigated during hydroforming process. The coarse-grained brass tubes were processed by the parallel tubular channel angular pressing (PTCAP) resulting in significant grain refinement. Then, coarse grained and UFG tubes were processed in a square-sectional hydroforming die. The results showed that the UFG tubes due to the lower formability and higher strength had a larger corner radius which was 6.35 mm while it was 1.9 mm for the annealed tube which is in good agreement with the tensile test data. Thickness distribution of the tubes were also examined through FEM simulation, and it was compared with the experimental data. SEM micrography was applied to evaluate fracture surface of the tubes after bursting.

引用

页码：2783 / 2790

页数：8

共 29 条

[21] A deep neural network approach to predict dimensional accuracy of thin-walled tubes in backward flow forming plasticity process
Kocabicak, Acar Can
Wang, Can
Han, Sutao
Nguyen-Xuan, H.
Kosec, Gregor
Wang, Lihua
Wahab, Magd Abdel
JOURNAL OF MANUFACTURING PROCESSES, 2025, 141 : 59 - 80
[22] Novel approach for analysis of deformation behavior of thin-walled tube in free hydro-bulging process
Yang, LF
Guo, C
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2005, 15 : 299 - 304
[23] Further assessment of the plastic instability of thin-walled tubes in double-sided hydro-bulging process with verification experiments
Cui, Xiao-Lei
Wang, Xiao-Song
Yuan, S. J.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2019, 233 (03) : 776 - 786
[24] Modeling and experimental study on deformation prediction of thin-walled turbine blades during investment casting process
Zhou, Leyao
Wang, Donghong
Cui, Jiayu
Zhao, Daiyin
Liu, Shumei
Shuai, Sansan
Yin, Yajun
Shu, Da
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2024, 238 (1-2) : 223 - 234
[25] In-situ EBSD observation of texture evolution and lattice rotation behavior in shear deformation of thin-walled aluminum alloy tubes
Zhang, Shuning
Pei, Yanbo
Wang, Xiaosong
Liu, Gang
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 29 : 449 - 460
[26] Quasi-static mechanical behavior of filament wound composite thin-walled tubes: Tension, torsion, and multi-axial loading
Chang, Yipeng
Wen, Weidong
Xu, Yiming
Cui, Haitao
Xu, Ying
THIN-WALLED STRUCTURES, 2022, 177
[27] Effect of Process Parameters on Formability of a AZ31 Magnesium Alloy Thin-Walled Cylindrical Part Formed by Multistage Warm Single-Point Incremental Forming
An, Zhi-guo
Yan, Dong
Qie, Jian-jian
Lu, Zai-liang
Gao, Zheng-yuan
FRONTIERS IN MATERIALS, 2020, 7
[28] Quasi-static tensile behavior of large-diameter thin-walled Ti-6Al-4V tubes at elevated temperature
Tao Zhijun
Yang He
Li Heng
Fan Xiaoguang
CHINESE JOURNAL OF AERONAUTICS, 2016, 29 (02) : 542 - 553
[29] Microstructural evolution, mechanical properties, and strain hardening behavior of ultrafine grained commercial pure copper during the accumulative roll bonding process
Fattah-alhosseini, A.
Imantalab, O.
Mazaheri, Y.
Keshavarz, M. K.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 650 : 8 - 14

← 1 2 3 →