Hot deformation behavior of Mg-5Li-3Al-2Zn-0.2Zr alloy based on constitutive analysis, processing map, and microstructure evolution

被引：9

作者：

Sun, Yuehua ^{[1
]}

Yang, Bin ^{[1
]}

Zhang, Fan ^{[1
]}

Wang, Richu ^{[2
]}

Peng, Chaoqun ^{[2
]}

Ren, Jian ^{[1
]}

Song, Guangsheng ^{[1
]}

机构：

[1] Anhui Univ Technol, Sch Mat Sci & Engn, Maanshan 243002, Peoples R China

[2] Cent South Univ, Sch Mat Sci & Engn, Changsha 410083, Peoples R China

来源：

JOURNAL OF ALLOYS AND COMPOUNDS | 2023年 / 941卷

关键词：

Mg -Li alloy; Hot compression; Constitutive model; Processing map; Dynamic recrystallization; DYNAMIC RECRYSTALLIZATION BEHAVIOR; MECHANICAL-BEHAVIOR; ROOM-TEMPERATURE; MG; LI; COMPRESSION; EXTRUSION; SLIP; DISLOCATIONS; MG-3AL-1ZN;

D O I：

10.1016/j.jallcom.2023.168983

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

The hot deformation behavior of Mg-5Li-3Al-2Zn-0.2Zr alloy was investigated via hot compression tests at 573-673 K/0.001-1 s-1. True stress-strain curves exhibit typical dynamic recrystallization characteristic, the proposed strain-compensated Zener-Hollomon model shows high accuracy in predicting flow stress, and the average activation energy of the alloy is calculated as 164.2196 kJ center dot mol-1. The instability region spans all temperatures at higher strain rates and the cause is the formation of local deformation bands composed of ultrafine recrystallized grains. The optimum deformation processing for Mg-5Li-3Al-2Zn-0.2Zr alloy is determined as 673 K/0.001 s-1. The microstructure evolution reveals that the alloy compressed at 573-623 K mainly undergoes continuous dynamic recrystallization controlled by dislocation cross-slip, and the alloy compressed at 673 K mainly undergoes discontinuous dynamic recrystallization controlled by dislocation climb. (c) 2023 Elsevier B.V. All rights reserved.

引用

页数：16

共 46 条

[1] Magnesium alloys development towards the 21st century
Aghion, E
Bronfin, B
[J]. MAGNESIUM ALLOYS 2000, 2000, 350-3 : 19 - 28
[2] Application of texture simulation to understanding mechanical behavior of Mg and solid solution alloys containing Li or Y
Agnew, SR
Yoo, MH
Tomé, CN
[J]. ACTA MATERIALIA, 2001, 49 (20) : 4277 - 4289
[3] Transmission electron microscopy investigation of ⟨c+a⟩ dislocations in Mg and α-solid solution Mg-Li alloys
Agnew, SR
Horton, JA
Yoo, MH
[J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2002, 33 (03): : 851 - 858
[4] Comparative study of the deformation behavior of hexagonal magnesium-lithium alloys and a conventional magnesium AZ31 alloy
Al-Samman, T.
[J]. ACTA MATERIALIA, 2009, 57 (07) : 2229 - 2242
[5] Non-basal slips in magnesium and magnesium-lithium alloy single crystals
Ando, S
Tonda, H
[J]. MAGNESIUM ALLOYS 2000, 2000, 350-3 : 43 - 48
[6] Hot deformation behavior of Mg-4Li-1Al alloy via hot compression tests
Askariani, Seyed Alireza
Pishbin, Seyed Mohammad Hasan
[J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2016, 688 : 1058 - 1065
[7] Temperature dependency of slip and twinning in plane strain compressed magnesium single crystals
Chapuis, Adrien
Driver, Julian H.
[J]. ACTA MATERIALIA, 2011, 59 (05) : 1986 - 1994
[8] Constitutive equation and hot deformation behavior of homogenized Al-7.68Zn-2.12Mg-1.98Cu-0.12Zr alloy during compression at elevated temperature
Feng, D.
Zhang, X. M.
Liu, S. D.
Deng, Y. L.
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 608 : 63 - 72
[9] Correlation of plastic deformation and dynamic recrystallization in magnesium alloy Zk60
Galiyev, A
Kaibyshev, R
Gottstein, G
[J]. ACTA MATERIALIA, 2001, 49 (07) : 1199 - 1207
[10] A model of continuous dynamic recrystallization
Gourdet, S
Montheillet, F
[J]. ACTA MATERIALIA, 2003, 51 (09) : 2685 - 2699

← 1 2 3 4 5 →