Experimental investigation of a novel solar air heater based on heat pipe vacuum tube collector integrated with finned-tube heat exchanger

被引:5
作者
Sachdeva, Anshul [1 ]
Chandrashekara, M. [1 ]
Yadav, Avadhesh [2 ]
机构
[1] Natl Inst Technol Kurukshetra, Dept Mech Engn, Kurukshetra 136119, Haryana, India
[2] Natl Inst Solar Energy, Gurugram 122003, Haryana, India
关键词
Solar air heater; Heat pipe vacuum tube; Header; Finned-tube heat exchanger; Sensible heat storage; Thermal analysis; THERMAL PERFORMANCE; ENERGY; EXERGY; SYSTEM; FLOW;
D O I
10.1007/s10973-023-12413-9
中图分类号
O414.1 [热力学];
学科分类号
摘要
The study intends to analyze the thermal performance of a novel solar air heater based on heat pipe vacuum tube solar collector and finned-tube heat exchanger. The solar collector has been introduced with a new header where heat transfer fluid (Therminol-55) gains heat directly in contact with the condenser section of the heat pipe. This eliminates thermal paste application between the condenser and manifold in the existing systems. The system's thermal performance has been experimentally evaluated using two different (four-row and eight-row) finned-tube heat exchangers at four varied air flow rates, viz. 100 kg h(-1), 400 kg h(-1), 700 kg h(-1) and 1000 kg h(-1). The system with eight-row heat exchanger performed better than the four-row heat exchanger at each air flow rate. 100 kg h(-1) resulted in a maximum rise in temperature of air (55.4 & DEG;C) and maximum outlet temperature of air (89.4 & DEG;C). Meanwhile, the maximum energy and exergy efficiency of 95.7% and 2.17% were observed at 1000 kg h(-1). The maximum effectiveness of the four and eight-row heat exchangers was found as 70.7% and 79.4%, respectively, at 100 kg h(-1). The monthly cost saving by utilization of the proposed system is 65.65 $, and the payback period is 12.4 months. The amount of CO2 averted from releasing into the atmosphere is 787.7 kg per month. The results suggest the utility of the proposed solar air heater as an environment-friendly replacement for conventional air heaters for consistent operation in the daytime. The experimental study was performed at the campus of NIT Kurukshetra, India (29.9476 & DEG;N, 76.8155 & DEG;E).
引用
收藏
页码:10917 / 10936
页数:20
相关论文
共 49 条
[1]   Thermal flow and heat performance analyses in circular pipe using different twisted tape parameters based on design of experiments [J].
Al-Obaidi, Ahmed Ramadhan .
HEAT TRANSFER, 2022, 51 (08) :7202-7232
[2]   Effect of different corrugation interruptions Parameters on thermohydrodynamic characteristics and heat transfer performance of 3D Three-dimensional corrugated tube [J].
Al-Obaidi, Ahmed Ramadhan ;
Alhamid, Jassim ;
Khalaf, Hussam Ali .
CASE STUDIES IN THERMAL ENGINEERING, 2022, 32
[3]   Investigation of the effect of various corrugated pipe configurations on thermo-hydraulic flow and enhancement of heat transfer performance with the development of different correlations [J].
Al-Obaidi, Ahmed Ramadhan ;
Alhamid, Jassim .
INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2022, 176
[4]   Characterization of internal thermohydraulic flow and heat transfer improvement in a three-dimensional circular corrugated tube surfaces based on numerical simulation and design of experiment [J].
Al-Obaidi, Ahmed Ramadhan .
HEAT TRANSFER, 2022, 51 (05) :4688-4713
[5]   Investigation of thermal flow structure and performance heat transfer in three-dimensional circular pipe using twisted tape based on Taguchi method analysis [J].
Al-Obaidi, Ahmed Ramadhan .
HEAT TRANSFER, 2022, 51 (02) :1649-1667
[6]   Investigation on effects of varying geometrical configurations on thermal hydraulics flow in a 3D corrugated pipe [J].
Al-Obaidi, Ahmed Ramadhan .
INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2022, 171
[7]   Investigation of flow pattern, thermohydraulic performance and heat transfer improvement in 3D corrugated circular pipe under varying structure configuration parameters with development different correlations [J].
Al-Obaidi, Ahmed Ramadhan ;
Alhamid, Jassim .
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2021, 126
[8]   Analysis on flow structure and improvement of heat transfer in 3D circular tube with varying axial groove turbulator configurations [J].
Al-Obaidi, Ahmed Ramadhan ;
Alhamid, Jassim ;
Saleh, Qasim .
HEAT TRANSFER, 2021, 50 (07) :7333-7348
[9]   Flow Field Structure, Characteristics of Thermo-Hydraulic and Heat Transfer Performance Analysis in a Three Dimensions Circular Tube with Different Ball Turbulators Configurations [J].
Al-Obaidi, Ahmed Ramadhan ;
Chaer, Issa .
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2021, 46 (12) :12253-12282
[10]   Investigation of Thermo-Hydraulics Flow and Augmentation of Heat Transfer in the Circular Pipe by Combined Using Corrugated Tube with Dimples and Fitted with Varying Tape Insert Configurations [J].
Al-Obaidi, Ahmed Ramadhan ;
Alhamid, Jassim .
INTERNATIONAL JOURNAL OF HEAT AND TECHNOLOGY, 2021, 39 (02) :365-374