Understanding the effect of meat electrical conductivity on Pulsed Electric Field (PEF) process parameters and the ability of PEF to enhance the quality and shorten sous vide processing for beef short ribs

The aim of this research was to investigate how the electrical conductivity of short ribs affected Pulsed Electric Field (PEF) process parameters and the ability of PEF to enhance their quality and reduce sous vide (SV) pro-cessing time. Short ribs with different range of electrical conductivity (3-6, 6-9, and 9-12 mS/cm) values were treated using input voltage of 10 kV, pulse width of 20 mu s, pulse frequency of 50 Hz and pulse number, of either 1600 (low intensity PEF/LPEF) or 5200 (high intensity PEF/HPEF), followed by SV processing at 60 degrees C for either 24 or 36 h. The quality parameters assessed were cooking loss (%), Texture Profile Analysis (TPA) parameters, and Commission Internationale d'Eclairage (CIE) La*b* colour parameters. There was a variation in electrical conductivity of short ribs according to the position of the bone in the short rib, which demonstrated good congruence with the distribution of fat and connective tissue. SV processing with or without PEF pre-treatment did not have a significant effect (p > 0.05) on cooking loss or CIE La*b* colour parameters. Short ribs with a medium conductivity (6-9 mS/cm) had a significantly lower hardness after high intensity PEF followed by SV for 24 h, whilst short ribs with an average conductivity of 3-6 and 9-12 mS/cm required longer SV time (up to 36 h) and had a significantly lower hardness compared to non PEF pre-treated samples. TPA values of short ribs treated with the same PEF intensity and SV processing parameters were comparable regardless of the short ribs initial electrical conductivity, which indicates that PEF treatment could ameliorate the biological electrochemical variability inherent to short ribs and PEF could be the potential tool to decrease their SV processing time and enhance their tenderness.