Experimental Investigation on Mechanical properties of CF15PET and GF30PP materials produced with different raster angles

被引：16
作者：
Kopar, Mehmet [2 ]
Erdas, Mehmet Umut [2 ]
Yildiz, Ali Riza [1 ]
机构：
[1] Bursa Uludag Univ, Dept Mech Engn, Bursa, Turkiye
[2] Bursa Uludag Univ, Dept Auomot Engn, Bursa, Turkiye
来源：
MATERIALS TESTING | 2024年 / 66卷 / 06期
关键词：
CF15PET; GF30PP; mechanical properties; FDM; characterization; DESIGN OPTIMIZATION; CRASHWORTHINESS; PERFORMANCE; COMPOSITES; ALGORITHM; CARBON;
D O I：
10.1515/mt-2023-0226
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
In recent years, additive manufacturing (AM) technologies have been used in many industries, such as automotive, defense, space, and aviation. Depending on the development of this technology, the effect of the relationship between many parameters, such as raster angles, production speed, and melting temperature used during the production of materials, has been an important issue in the mechanical properties of materials. In this study, the effects of +/- 45 degrees and 0-90 degrees raster angles used during the production of 15 % short carbon fiber reinforced polyethylenetereflatate (CF15PET) and 30 % short glass fiber reinforced polypropylene (GF30PP) materials on the mechanical properties of the materials were investigated. As a result of the study, it was determined that different raster angles affect the mechanical properties of both materials.
引用
收藏
页码：847 / 855
页数：9
相关论文
共 63 条
[1]   Mechanical engineering design optimisation using novel adaptive differential evolution algorithm [J].
Abderazek, Hammoudi ;
Yildiz, Ali Riza ;
Sait, Sadiq M. .
INTERNATIONAL JOURNAL OF VEHICLE DESIGN, 2019, 80 (2-4) :285-329
[2]   Optimal design of planetary gear train for automotive transmissions using advanced meta-heuristics [J].
Abderazek, Hammoudi ;
Sait, Sadiq M. ;
Yildiz, Ali Riza .
INTERNATIONAL JOURNAL OF VEHICLE DESIGN, 2019, 80 (2-4) :121-136
[3]   Elastic properties of 3D printed fibre-reinforced structures [J].
Al Abadi, Haider ;
Huu-Tai Thai ;
Paton-Cole, Vidal ;
Patel, V. I. .
COMPOSITE STRUCTURES, 2018, 193 :8-18
[4]   Effect of infill density, build direction and heat treatment on the tensile mechanical properties of 3D-printed carbon-fiber nylon composites [J].
Ali, Zeeshan ;
Yan, Yuekai ;
Mei, Hui ;
Cheng, Laifei ;
Zhang, Litong .
COMPOSITE STRUCTURES, 2023, 304
[5]   A Comparative Study of State-of-the-art Metaheuristics for Solving Many-objective Optimization Problems of Fixed Wing Unmanned Aerial Vehicle Conceptual Design [J].
Anosri, Siwakorn ;
Panagant, Natee ;
Champasak, Pakin ;
Bureerat, Sujin ;
Thipyopas, Chinnapat ;
Kumar, Sumit ;
Pholdee, Nantiwat ;
Yildiz, Betuel Sultan ;
Yildiz, Ali Riza .
ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING, 2023, 30 (06) :3657-3671
[6]   Optimum design of automobile components using lattice structures for additive manufacturing [J].
Aslan, Busra ;
Yildiz, Ali Riza .
MATERIALS TESTING, 2020, 62 (06) :633-639
[7]   Experimental Quantification of the Variability of Mechanical Properties in 3D Printed Continuous Fiber Composites [J].
Becker, Clarissa ;
Oberlercher, Hannes ;
Heim, Rosmarie Brigitte ;
Wuzella, Guenter ;
Faller, Lisa-Marie ;
Riemelmoser, Franz Oswald ;
Nicolay, Pascal ;
Druesne, Frederic .
APPLIED SCIENCES-BASEL, 2021, 11 (23)
[8]   Tensile Properties and Manufacturing Defectives of Short Carbon Fiber Specimens Made with the FDM Process [J].
Blaj, Madalina-Ioana ;
Zaharia, Sebastian-Marian ;
Pop, Mihai Alin ;
Oancea, Gheorghe .
MATERIALE PLASTICE, 2022, 59 (01) :33-43
[9]   Mechanical properties of PLA-graphene filament for FDM 3D printing [J].
Camargo, Jose C. ;
Machado, Alisson R. ;
Almeida, Erica C. ;
Moura Sousa Silva, Erickson Fabiano .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 103 (5-8) :2423-2443
[10]   Hygromechanical properties of 3D printed continuous carbon and glass fibre reinforced polyamide composite for outdoor structural applications [J].
Chabaud, G. ;
Castro, M. ;
Denoual, C. ;
Le Duigou, A. .
ADDITIVE MANUFACTURING, 2019, 26 :94-105
1234567