Performance of high-concentration photovoltaic cells cooled by a hybrid microchannel heat sink

The electrical performance and equipment lifetime of high-concentration photovoltaic cells depends heavily on efficient cooling. In this paper, we applied a hybrid configuration to the cooling of a high-concentration photovoltaic cell, an innovative pattern derived from a comprehensive study on the combination of oblique microchannel and micro pin fin. Results from this study found that an elliptical pin fin pattern conforming with streamlines most effectively removed heat flux with a Nusselt number of 65.44 at a Reynolds number 1250. Then, the performance evaluation of a photovoltaic cell with a concentration ratio of 1000 was carried out on the hottest day of each season in Shiraz under actual boundary conditions. With an average flow rate of 30 ml/min in the spring, the implementation of this hybrid design resulted in the photovoltaic cell achieving an electrical efficiency of 40.16 while still maintaining a constant surface temperature of 301 K. Unlike a straight micro channel, which failed to maintain a constant cell temperature throughout summer's hottest hours, this hybrid configuration succeeded in sustaining cooling with an average flow rate of 90 ml/min. In the winter and autumn, the pump's average power consumption required for cooling was about 25 and 38 mW, respectively. Moreover, the maximum output electrical power in the summer was 2.8 W, with pumping power contributing to 1500 mW.