Effect of loading speed on gap resistance and tensile strength of flexor tendon repair under cyclic loading test

Postoperative digit motion is important for the functional recovery of injured tendons. To date, it is unknown whether the loading speed impacts the biomechanical properties of a repaired tendon. This study investigated the effect of loading speed on the gap resistance and tensile strength of tendon repairs. One hundred porcine flexor tendons were repaired with two core sutures, 4-strand modified Kessler and double Q, and cyclically loaded at the speeds of 10, 40, 80, 160, and 320 mm/min. The number of tendons that formed an initial or 2 mm gap at the repair site during cyclic loading, stiffness at the 1st and 20th loading cycles, gap size between tendon ends when cyclic loading ended, and the ultimate strength were recorded. Under the lowest loading speed, the tendons repaired with the 4-strand modified Kessler suture developed significantly larger gaps and smaller stiffness than those with a greater loading speed. The loading speed did not affect the maximum strength of both tendon repairs. The findings suggest that very slow motion promotes gap formation of tendon repair with inferior gap resistance. The rate corresponds to regular hand action or the tendon core suture possessing a strong gap resistance increases the safety margin during early active finger movement. Our findings help to guide the exercise regimens after tendon surgery.