EVALUATION OF DIFFERENT PASTEURIZATION AND STERILIZATION METHODS FOR OYSTER MUSHROOM SUBSTRATES

Oyster mushrooms can be cultivated with great spatial efficiency, on nutrient -poor plant materials, without light and under diverse climatic conditions. Their production therefore has a great potential for improving food security, especially in impoverished and overpopulated areas. However, the pasteurization or sterilization of mushroom substrates uses a lot of energy and water. This study investigates the impact of different pasteurization and sterilization techniques on the growth and yield of oyster mushrooms, and evaluates their water and energy usage. The efficacy of heat -based methods, including hot water, hot air, and pressurized steam, as well as a chemical method utilizing hydrated lime (Ca(OH)(2)) were assessed. The results show that sterilizing mushroom substrates through autoclaving can significantly increase the dry yields, up to 50% compared to pasteurization methods. However, pasteurization methods also achieved excellent results compared to untreated substrates, with good harvests and low pest occurrence. The mushroom water content was significantly higher in pasteurization methods where the substrate is submerged in water. In terms of fresh yield, hot water pasteurization was as good as autoclaving and significantly better than the other pasteurization methods. Hot air pasteurization has, on balance, a better water and energy efficiency than autoclave sterilization (about 75 % less energy) or hot water pasteurization (about 85 % less water). When performed at an air temperature of 75degree celsius, which was found to be sufficient for successful mushroom cultivation, as little as 1068 kJ was needed to pasteurize one kg of dry substrate (e.g. maize straw). While hydrated lime pasteurization could use as little as 270 kJ per kg of dry substrate, it is very wasteful of water, as is hot water pasteurization and could lead to nutrient leaking. The success of mushroom cultivation, especially with hot air pasteurization, could also be influenced by the duration of substrate soaking before treatment. The study provides slight evidence, although inconclusive, for a positive effect of prolonged soaking periods on yield. Lastly, the study discusses the applicability of different disinfection techniques at varying production scales and for different mushroom species, focusing on African countries, where comparably small mushroom economies are growing rapidly, but often through the use of unsustainable pasteurization technology.