Review on robot-assisted polishing: Status and future trends

被引：61
作者：
Ke, Xiaolong [1 ]
Yu, Yongheng [1 ]
Li, Kangsen [2 ]
Wang, Tianyi [3 ]
Zhong, Bo [4 ]
Wang, Zhenzhong [5 ]
Kong, Lingbao [6 ]
Guo, Jiang [7 ]
Huang, Lei [3 ]
Idir, Mourad [3 ]
Liu, Chao [8 ]
Wang, Chunjin [2 ]
机构：
[1] Xiamen Univ Technol, Sch Mech & Automot Engn, Xiamen 361024, Peoples R China
[2] Hong Kong Polytech Univ, Dept Ind Syst & Engn, State Key Lab Ultraprecis Machining Technol, Kowloon, Hong Kong, Peoples R China
[3] Brookhaven Natl Lab, Natl Synchrotron Light Source NSLS II 2, POB 5000, Upton, NY 11973 USA
[4] Tsinghua Univ, Dept Automation, Beijing 100084, Peoples R China
[5] Xiamen Univ, Sch Aeronaut & Astronaut, Xiamen 361005, Peoples R China
[6] Fudan Univ, Shanghai Engn Res Ctr Ultraprecis Opt Mfg, Sch Informat Sci & Technol, Shanghai 200438, Peoples R China
[7] Dalian Univ Technol, Key Lab Precis & Nontradit Machining Technol, Minist Educ, Dalian 116024, Peoples R China
[8] Aston Univ, Coll Engn & Phys Sci, Birmingham B47ET, England
来源：
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING | 2023年 / 80卷
关键词：
Polishing; Robot-assisted polishing; Force control; Error compensation; Ultra-precision machining; TOOL INFLUENCE FUNCTION; MATERIAL REMOVAL CHARACTERISTICS; NON-KINEMATIC CALIBRATION; PARAMETER-IDENTIFICATION; CONTROL-SYSTEM; FORCE CONTROL; VIBRATION SUPPRESSION; FLEXIBLE MANIPULATOR; SURFACE GENERATION; INDUSTRIAL ROBOTS;
D O I：
10.1016/j.rcim.2022.102482
中图分类号：
TP39 [计算机的应用];
学科分类号：
081203 ; 0835 ;
摘要：
Nowadays, precision components have been extensively used in various industries such as biomedicine, pho-tonics, and optics. To achieve nanometric surface roughness, high-precision polishing is mandatory. Compared with the conventional polishing techniques, the robot-assisted polishing has the advantages of flexible working ranges and low cost. Therefore, it has been more widely deployed in demanding polishing tasks. However, few review articles were found on this topic to provide a general progress on the development of the robot-assisted polishing technology. This paper reviews the recent advancement of the robot-assisted polishing. Firstly, the integration of robots with various polishing techniques is overviewed, followed by the introduction of the research status of constant force control in robot-assisted polishing. Then, the errors in typical robot-assisted polishing systems are analyzed, together with the corresponding compensation methods. At last, the future trends in the development of robot-assisted polishing are discussed. This review is intended as a roadmap for researchers or engineers who are interested in robot-assisted polishing or machining.
引用
收藏
页数：28
相关论文
共 206 条
  • [11] Contact force control and vibration suppression in robotic polishing with a smart end effector
    Chen Fan
    Zhao Huan
    Li Dingwei
    Chen Lin
    Tan Chao
    Ding Han
    [J]. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING, 2019, 57 : 391 - 403
  • [12] A review on recent advances in machining methods based on abrasive jet polishing (AJP)
    Chen, Fengjun
    Miao, Xiangliang
    Tang, Yu
    Yin, Shaohui
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 90 (1-4) : 785 - 799
  • [13] Chen SF, 2002, 2002 IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND AUTOMATION, VOLS I-IV, PROCEEDINGS, P544, DOI 10.1109/ROBOT.2002.1013415
  • [14] Non-kinematic calibration of industrial robots using a rigid-flexible coupling error model and a full pose measurement method
    Chen Xiaoyan
    Zhang Qiuju
    Sun Yilin
    [J]. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING, 2019, 57 : 46 - 58
  • [15] Modelling and simulation of structure surface generation using computer controlled ultra-precision polishing
    Cheung, C. F.
    Kong, L. B.
    Ho, L. T.
    To, S.
    [J]. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2011, 35 (04): : 574 - 590
  • [16] Curvature-adaptive multi-jet polishing of freeform surfaces
    Cheung, Chi Fai
    Wang, Chunjin
    Ho, Lai Ting
    Chen, Jiangbo
    [J]. CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2018, 67 (01) : 357 - 360
  • [17] Screw based kinematic calibration method for robot manipulators with joint compliance using circular point analysis
    Cho, Youngsu
    Do, Hyun Min
    Cheong, Joono
    [J]. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING, 2019, 60 : 63 - 76
  • [18] Design of the parallel mechanism for a hybrid mobile robot in wind turbine blades polishing
    Chong, Zenghui
    Xie, Fugui
    Liu, Xin-Jun
    Wang, Jinsong
    Niu, Huifeng
    [J]. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING, 2020, 61 (61)
  • [19] Cong DC, 2006, WCICA 2006: SIXTH WORLD CONGRESS ON INTELLIGENT CONTROL AND AUTOMATION, VOLS 1-12, CONFERENCE PROCEEDINGS, P8514
  • [20] Analysis of Force Signals for the Estimation of Surface Roughness during Robot-Assisted Polishing
    de Agustina, Beatriz
    Maria Marin, Marta
    Teti, Roberto
    Maria Rubio, Eva
    [J]. MATERIALS, 2018, 11 (08)
12345678910