Investigation on tribo-characteristics of electrochemical jet machined part manufactured by laser powder bed fusion

被引：1
作者：
Kumar, Pravin [1 ]
Chaudhary, Bhavesh [2 ]
Jain, N. K. [2 ]
Patel, Mahesh [3 ]
Dixit, Pradeep [1 ]
机构：
[1] Indian Inst Technol, Dept Mech Engn, Electrochem Microfabricat Lab, Mumbai 400076, India
[2] Dept Mech Engn, Simrol, India
[3] Indian Inst Technol Indore, Dept Met Engn & Mat, Simrol 453552, India
来源：
TRIBOLOGY INTERNATIONAL | 2023年 / 188卷
关键词：
Laser powder bed fusion; Non-conventional machining; Electrochemical jet machining; Surface finish; Wear; SURFACE; SPATTER; MECHANISMS; COMPONENTS; ROUGHNESS; STEEL;
D O I：
10.1016/j.triboint.2023.108766
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Electrochemical jet machining (ECJM) is a toolless electrochemical-based material removal process suitable for finishing the Laser powder bed fusion (L-PBF) manufactured parts. However, the investigation of the tribological characteristics of the finished part is unknown. Therefore, in this article, an investigation was made to evaluate the tribological characteristics of the electrochemical jet machined surface of SS316L part produced by L-PBF. The experimental results revealed improvement in the roughness parameters after the ECJM. The wear tests revealed that the friction coefficients (COF) of the finished samples were significantly lower in comparison to the as-manufactured samples. During the investigation, the dominating mechanisms of the wear were found to be adhesive and delamination wear.
引用
收藏
页数：16
相关论文
共 49 条
  • [1] Annamaria G, 2022, INT J ADV MANUF TECH, V120, P1433, DOI 10.1007/s00170-022-08840-x
  • [2] [包丽丽 BAO Li-li], 2009, [燃料化学学报, Journal of Fuel Chemistry and Technology], V37, P104
  • [3] Effect of composition on the tensile and corrosion performance of nickel aluminium bronze produced via laser powder bed fusion
    Barr, Cameron
    Pateras, Aaron
    Molotnikov, Andrey
    Clarke, David
    Brandt, Milan
    [J]. ADDITIVE MANUFACTURING, 2022, 54
  • [4] Metal additive manufacturing in aerospace: A review
    Blakey-Milner, Byron
    Gradl, Paul
    Snedden, Glen
    Brooks, Michael
    Pitot, Jean
    Lopez, Elena
    Leary, Martin
    Berto, Filippo
    du Plessis, Anton
    [J]. MATERIALS & DESIGN, 2021, 209
  • [5] The significance and use of the friction coefficient
    Blau, PJ
    [J]. TRIBOLOGY INTERNATIONAL, 2001, 34 (09) : 585 - 591
  • [6] Fatigue Life of Titanium Alloys Fabricated by Additive Layer Manufacturing Techniques for Dental Implants
    Chan, Kwai S.
    Koike, Marie
    Mason, Robert L.
    Okabe, Toru
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2013, 44A (02): : 1010 - 1022
  • [7] Effect of laser polishing on the microstructure and mechanical properties of stainless steel 316L fabricated by laser powder bed fusion
    Chen, Lan
    Richter, Brodan
    Zhang, Xinzhou
    Bertsch, Kaila B.
    Thoma, Dan J.
    Pfefferkorn, Frank E.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 802
  • [8] Improvement of selective laser melting substrate surface performance via combined processing of jet electrochemical machining and jet electrodeposition
    Cheng, Haixia
    Xu, Bowen
    Xie, Deqiao
    Yang, Youwen
    Shen, Lida
    Qiu, Mingbo
    Chen, Ya
    Lou, Guibin
    Zhao, Jianfeng
    Tian, Zongjun
    [J]. SURFACE & COATINGS TECHNOLOGY, 2021, 412
  • [9] The Condition of Ni-Cr Alloy Surface After Abrasive Blasting with Various Parameters
    Czepulkowska, Weronika
    Wolowiec-Korecka, Emilia
    Klimek, Leszek
    [J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2020, 29 (03) : 1439 - 1444
  • [10] Additive manufacturing of metallic components - Process, structure and properties
    DebRoy, T.
    Wei, H. L.
    Zuback, J. S.
    Mukherjee, T.
    Elmer, J. W.
    Milewski, J. O.
    Beese, A. M.
    Wilson-Heid, A.
    De, A.
    Zhang, W.
    [J]. PROGRESS IN MATERIALS SCIENCE, 2018, 92 : 112 - 224
12345