Heterojunction PdO/CoS as a High-Performance Visible-Light Active Photocatalyst Elimination of Methylene Blue from Aqueous Media

In this research, the photocatalytic degradation of methylene blue was investigated using synthesized PdO/CoS nanocomposite under visible light irradiation. The structural and morphological properties were determined using X-ray diffraction (XRD), scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET) surface area analysis, Mott-Schottky analysis, and transmission electron microscopy (TEM). The Mott-Schottky analysis confirmed the formation of a p-n heterojunction, and the flat band potential values for the n-type and p-type semiconductors were found to be - 1 and 1.3, respectively. The bandgap of the composite was determined to be 3 eV using Diffuse Reflectance Spectroscopy (DRS). When 0.1 g of the synthesized composite was used for 90 min, it successfully degraded 91% of methylene blue with an initial concentration of 10 ppm. In the Design of Experiments (DOE) approach, the optimum conditions for this research were found to be a catalyst mass of 0.06 g, an initial dye concentration of 8 ppm, and 2% palladium doping at pH 10, resulting in a 92.38% degradation efficiency in 110 min. To model the degradation of methylene blue using the synthesized composite, the Fritz-Schlunder and Koble-Corrigan models achieved the highest correlation coefficients (0.995 and 0.992, respectively) and the lowest error functions (0.024, 0.0008) and (0.032, 0.002), respectively. Additionally, the Langmuir-Hinshelwood and Intra-particle diffusion control kinetic models showed the highest correlation coefficient (98%). In summary, the study demonstrated that the PdO/CoS composite exhibited excellent photocatalytic activity for methylene blue degradation, and the optimized conditions resulted in high degradation efficiency. The proposed kinetic models provided valuable insights into the degradation mechanism of methylene blue using the synthesized composite.