Effect of Self-Adhesive Resin Cement Film Thickness on the Shear Bond Strength of Lithium Disilicate Ceramic-Cement-Tooth Triplex

Cement film thickness may have an impact on the shear bond strength (SBS) of lithium disilicate dental ceramics luted to human enamel with resin cement. The objective of this study was to evaluate SBS of lithium disilicate ceramics adhered to enamel using resin cement at different thicknesses. In total, 50 ceramic specimens (3 x 3 x 3 mm) and 50 premolar teeth were prepared and randomly assigned to 5 groups (n = 10 each). Ceramic specimens were designed with five cement film thicknesses (50 mu m; 100 mu m; 150 mu m; 200 mu m; and 300 mu m). Teeth surfaces (4 x 4 mm) were prepared with a high-speed handpiece mounted on a dental surveyor. Ceramic specimens were cemented to teeth with resin cement (3MTM RelyXTM U200, Resin-Self-Adhesive-Cement). The specimens were then thermocycled for 6000 cycles with a 30 s dwell time and a 5 s transfer time in water (5 degrees C and 55 degrees C). A Universal-Testing-Machine was used to measure SBS (MPa). Statistical analysis in SPSS included Anova and Tukey's tests. The SBSs of ceramics adhered to teeth revealed significantly different values across all test groups (p = 0.000). The findings showed that as cement layer thickness increased, so did the SBS. The cement spaces at 50 and 300 mu m had the lowest SBS (9.40 + 1.15 MPa) and maximum SBS (21.98 + 1.27 MPa), respectively. The SBS of the lithium disilicate ceramic luted to natural human enamel increased along with the cement layer thickness.