Ex-ante life cycle assessment of directed energy deposition based additive manufacturing: A comparative gearbox production case study

As new technologies emerge is necessary to assess if they can actually contribute to sustainable improvement of industrial processes. Life Cycle Assessment (LCA) is a valuable tool to determine environmental impacts and compare systems. However, this comparison raises challenges when they have different maturity. This paper performs ex -ante LCA of an additive manufacturing (AM) technology, based on a step -wise approach built with parametrized modelling, allowing fair comparison with its conventional counterpart, for the study case of a gearbox component. Results show that AM technology generates higher impacts than conventional manufacturing (CM) casting process, using baseline values. These impacts can be reduced by 94% with best operating performances from literature, with emissions from 4520 to 264 kg CO2 eq./kg piece, and nonsignificant difference with CM (demonstrated by Monte Carlo sampling). A 58% weight reduction is necessary for the AM process to improves its environmental sustainability. This research provides eco-design recommendations supporting decision making for further development of new technology.