Microstructure and Low-Temperature Toughness of Reheated Coarse-Grained Heat-Affected Zone of 06Ni9DR Steel

被引：0
作者：
Li, Liying [1 ]
Xiao, Wentao [1 ]
Niu, Shengyuan [1 ]
Gao, Yanwei [2 ]
Han, Bin [1 ]
Song, Lixin [3 ]
Li, Xueda [1 ]
机构：
[1] China Univ Petr East China, Sch Mat Sci & Engn, Qingdao, Peoples R China
[2] PetroChina Xinjiang Petr Engn Co Ltd, Kelamayi 834000, Peoples R China
[3] Offshore Oil Engn Qingdao CO LTD, Qingdao, Peoples R China
来源：
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE | 2024年 / 34卷 / 4期
关键词：
06Ni9DR steel; low-temperature toughness; microstructure; reheated coarse-grained heat-affected zone; thermal simulation; MARTENSITE-AUSTENITE CONSTITUENT; LATH MARTENSITE; BEHAVIOR; EMBRITTLEMENT;
D O I：
10.1007/s11665-024-09315-8
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The microstructure and low-temperature impact toughness of the reheated coarse-grained heat-affected zone (CGHAZ) of 06Ni9DR steel were investigated by using optical microscopy (OM), scanning electron microscopy (SEM), backscattered electron diffraction (EBSD) and welding thermal simulation techniques. The results show that both the impact energy and hardness of the reheated CGHAZ increase first and then decrease with the increase in the peak temperature of the second thermal cycle. The intercritically reheated CGHAZ (IRCGHAZ) has the highest impact energy and hardness, and the subcritically reheated CGHAZ (SRCGHAZ) has the lowest impact energy and hardness. The impact energy of the reheated CGHAZ is higher than that of CGHAZ, but much lower than that of the base metal. In addition, the hardness of the reheated CGHAZ is higher than that of the base metal. This indicates that the embrittlement of the overall reheated CGHAZ occurs. The SRCGHAZ becomes the local brittle zone. The SRCGHAZ embrittlement is due to the small number of effective large-angle grain boundaries and the coarse grain caused by "structure heredity".
引用
收藏
页码：3416 / 3424
页数：9
相关论文
共 50 条
  • [1] Microstructure and low temperature toughness of HAZ of domestic 06Ni9DR steel
    Li L.
    Wang X.
    Liu Z.
    Zhou C.
    Han B.
    Hanjie Xuebao/Transactions of the China Welding Institution, 2020, 41 (07): : 91 - 96
  • [2] Effect of preheating on microstructure and low-temperature toughness for coarse-grained heat-affected zone of 5% Ni steel joint made by laser welding
    Xin, Dongqun
    Cai, Yan
    Hua, Xueming
    WELDING IN THE WORLD, 2019, 63 (05) : 1229 - 1241
  • [3] Effect of preheating on microstructure and low-temperature toughness for coarse-grained heat-affected zone of 5% Ni steel joint made by laser welding
    Dongqun Xin
    Yan Cai
    Xueming Hua
    Welding in the World, 2019, 63 : 1229 - 1241
  • [4] Effect of Initial Microstructure on the Toughness of Coarse-Grained Heat-Affected Zone in a Microalloyed Steel
    Shi, Minghao
    Di, Man
    Zhang, Jian
    Kannan, Rangasayee
    Li, Jing
    Yuan, Xiaoguang
    Li, Leijun
    MATERIALS, 2021, 14 (16)
  • [5] Effect of morphologies of martensite-austenite constituents on impact toughness in intercritically reheated coarse-grained heat-affected zone of HSLA steel
    Luo, Xiang
    Chen, Xiaohua
    Wang, Tao
    Pan, Shiwei
    Wang, Zidong
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 710 : 192 - 199
  • [6] Factors influencing notch toughness of coarse-grained heat affected zone for 9% Ni steel
    Yan C.
    Li W.
    Liu H.
    Bai S.
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2010, 46 (18): : 96 - 101
  • [7] Effects of Small Ni Addition on the Microstructure and Toughness of Coarse-Grained Heat-Affected Zone of High-Strength Low-Alloy Steel
    Huang, Gang
    Wan, Xiangliang
    Wu, Kaiming
    Zhao, Huazhong
    Misra, Raja Devesh Kumarmr
    METALS, 2018, 8 (09):
  • [8] Effect of magnesium addition in low carbon steel part 2: toughness and microstructure of the simulated coarse-grained heat-affected zone
    Li, Xiaobing
    Zhang, Tongsheng
    Min, Yi
    Liu, Chengjun
    Jiang, Maofa
    IRONMAKING & STEELMAKING, 2019, 46 (03) : 301 - 311
  • [9] Low-temperature toughness properties of 500 MPa offshore steels and their simulated coarse-grained heat-affected zones
    Tervo, H.
    Kaijalainen, A.
    Pallaspuro, S.
    Anttila, S.
    Mehtonen, S.
    Porter, D.
    Komi, J.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 773 (773):
  • [10] Study on Microstructure Characterization and Impact Toughness in the Reheated Coarse-Grained Heat Affected Zone of V-N Microalloyed Steel
    Wu, Hongyan
    Xia, Dengliang
    Ma, Heng
    Du, Yu
    Gao, Cairu
    Gao, Xiuhua
    Du, Linxiu
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2022, 31 (01) : 376 - 382
12345