Influence of battery cell spacing on thermal performance of phase change material filled lithium-ion battery pack

The era of electric mobility has started, and petrol/diesel vehicles are being replaced by electric vehicles (EVs). The phase change material (PCM) is a trending field of research in its application of energy storage and thermal management. PCM-based thermal management method is found to be quite simple and effective for battery packs. However, its commercialization is difficult due to its low thermal conductivity and extra weight addition to the battery pack. Hence, the present research focuses on the battery performance with PCM. The experimental setup for a 48V, 25Ah battery pack is developed, and its performance is explored with and without PCM. The numerical model for same sized battery pack is developed, and validated with experimental results. The major objective of the present research is to find the optimal gap between two battery cells so that a sufficient amount of PCM can be filled inside the battery pack. Initially, inline and staggered cell arrangements are examined, and no significant difference in thermal performance is found. Further, cell spacing of 5 mm, 3 mm, and 1 mm are examined, and maximum temperature and temperature difference are compared along with the weight and volume of the battery pack. For a single charging process, 1 mm cell spacing is found sufficient, considering the weight of the battery pack and thermal performance. However, with 1 mm cell spacing, temperature increases significantly after each charging and discharging. At the same time, 3 mm and 5 mm are found as feasible solutions considering single and double charging -discharging cycles, respectively. 3 mm cell spacing is better option when weight is a critical issue, while 5 mm cell spacing is better when thermal performance is a critical issue. The current study offers guidance in the advancement of battery packs, particularly in cases where space constraints are a concern.