NOMA-based cognitive radio network with hybrid FD/HD relay in industry 5.0

The continued growth of the industrial Internet of Things (IoT) paves the way for the fifth industrial rev-olution (Industry 5.0), which is expected to further enhance the wireless connectivity and human machine collaboration. Nonetheless, Industry 5.0 will inevitably face the great challenges such as large scale connectivity and explosive data traffic because of the proliferation of IoT devices. To meet these challenges, we propose a novel non-orthogonal multiple access (NOMA)-based overlay cognitive radio (OCR) network for Industry 5.0. Specifically, the hybrid full-duplex (FD)/ half-duplex (HD) mode at the secondary user (SR) is adopted and in-phase and quadrature phase imbalance (IQI) is introduced to better comply with the practical scenarios. We investigate the outage probability (OP) and ergodic sum rate (ESR) of the considered network with the Nakagami-m channels. Extensive simulation experiments are performed to verify the accuracy of the analysis. From the simulation results, we can conclude: i) Increasing the signal-to-noise ratio (SNR), OP decreases but ESR increases and tends to a fixed value at high SNR regimes, indicating that the existence of IQI leads to a ceiling for the ESR; ii) The primary system has higher reliable performance at low SNR regions when SR is in FD mode, and for ergodicity, the system with FD relay is superior to HD relay; iii) The reliable performance of OMA system for primary users will be better since there is no interference at the relay.& COPY; 2022 The Author(s). Published by Elsevier B.V. on behalf of King Saud University. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).