Fatigue performance of metal additive manufacturing: a comprehensive overview

被引：18
作者：
Javidrad, Hamidreza [1 ]
Koc, Bahattin [1 ]
Bayraktar, Hakan [2 ]
Simsek, Ugur [2 ]
Gunaydin, Kadir [2 ]
机构：
[1] Sabanci Univ, Fac Engn & Nat Sci, TR-34956 Istanbul, Turkiye
[2] Gen Elect Aviat, Addit Mfg, TR-41400 Kocaeli, Turkiye
来源：
VIRTUAL AND PHYSICAL PROTOTYPING | 2024年 / 19卷 / 01期
关键词：
Metal additive manufacturing; fatigue life assessment; defect-based fatigue model; fatigue crack propagation; continuum damage mechanics; multistage modelling; defect detection; HIGH-CYCLE FATIGUE; CRACK GROWTH-BEHAVIOR; 316L STAINLESS-STEEL; POWDER BED FUSION; SURFACE-ROUGHNESS; LIFE PREDICTION; TI-6AL-4V ALLOY; PROCESSING PARAMETERS; MECHANICAL-PROPERTIES; ARTIFICIAL DEFECTS;
D O I：
10.1080/17452759.2024.2302556
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Fatigue life assessment of metal additive manufacturing (AM) products has remained challenging due to the uncertainty of as-built defects, heterogeneity of the microstructure, and residual stress. In the past few years, many works have been conducted to develop models in order to predict fatigue life of metal AM samples by considering the existence of AM inherent defects. This review paper addresses the main issues regarding fatigue assessment of metal AM parts by considering the effect of defects and post processing strategies. Mechanisms that are contributing to the failure of metal AM samples are categorized and discussed in detail. Several modelling approaches exist in the case of fatigue life prediction. The common fatigue models that are compatible with AM properties are thoroughly explained by discussing the previous works and highlighting their major conclusions. In addition, the use of machine learning is identified as the future of metal AM fatigue life assessment due to their high performance. The main challenge of today's fatigue and fracture community was identified as the fatigue life estimation of complex geometries with the presence of different types of defects, anisotropic microstructure, and complex state of residual stress. This work proposes the available approaches to tackle this challenge.
引用
收藏
页数：48
相关论文
共 302 条
  • [21] Hot dwell-fatigue behaviour of additively manufactured AlSi10Mg alloy: Relaxation, cyclic softening and fracture mechanisms
    Bao, Jianguang
    Wu, Zhengkai
    Wu, Shengchuan
    Withers, Philip J.
    Li, Fei
    Ahmed, Saad
    Benaarbia, Adil
    Sun, Wei
    [J]. INTERNATIONAL JOURNAL OF FATIGUE, 2021, 151
  • [22] Orientation-dependent fatigue assessment of Ti6Al4V manufactured by L-PBF: Size of surface features and effect
    Barricelli, L.
    Patriarca, L.
    du Plessis, A.
    Beretta, S.
    [J]. INTERNATIONAL JOURNAL OF FATIGUE, 2023, 168
  • [23] State of the art on chemical and electrochemical based finishing processes for additive manufactured features
    Basha, M. M.
    Basha, S. M.
    Jain, V. K.
    Sankar, M. R.
    [J]. ADDITIVE MANUFACTURING, 2022, 58
  • [24] The influence of surface finish and build orientation on the low cycle fatigue behaviour of laser powder bed fused stainless steel 316L
    Beard, William
    Lancaster, Robert
    Barnard, Nicholas
    Jones, Thomas
    Adams, Jack
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2023, 864
  • [25] Building the Kitagawa-Takahashi diagram of flawed materials and components using an optimized V-notched cylindrical specimen
    Benedetti, M.
    Santus, C.
    [J]. ENGINEERING FRACTURE MECHANICS, 2020, 224
  • [26] The effect of post-sintering treatments on the fatigue and biological behavior of Ti-6Al-4V ELI parts made by selective laser melting
    Benedetti, M.
    Torresani, E.
    Leoni, M.
    Fontanari, V.
    Bandini, M.
    Pederzolli, C.
    Potrich, C.
    [J]. JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 2017, 71 : 295 - 306
  • [27] A benchmark activity on the fatigue life assessment of AlSi10Mg components manufactured by L-PBF
    Beretta, S.
    Patriarca, L.
    Gargourimotlagh, M.
    Hardaker, A.
    Brackett, D.
    Salimian, M.
    Gumpinger, J.
    Ghidini, T.
    [J]. MATERIALS & DESIGN, 2022, 218
  • [28] Fatigue strength assessment of "as built" AlSi10Mg manufactured by SLM with different build orientations
    Beretta, S.
    Gargourimotlagh, M.
    Foletti, S.
    du Plessis, A.
    Riccio, M.
    [J]. INTERNATIONAL JOURNAL OF FATIGUE, 2020, 139
  • [29] A comparison of fatigue strength sensitivity to defects for materials manufactured by AM or traditional processes
    Beretta, S.
    Romano, S.
    [J]. INTERNATIONAL JOURNAL OF FATIGUE, 2017, 94 : 178 - 191
  • [30] Calibration of NASGRO equation for mixed-mode loading using experimental and numerical data
    Berrios, David R.
    Franco, Rosendo
    Rumiche, Francisco
    [J]. REVISTA FACULTAD DE INGENIERIA-UNIVERSIDAD DE ANTIOQUIA, 2020, (97): : 65 - 77
12345678910