Study of the deorbit sail damage under the combined effects of atomic oxygen erosion and material defects

被引:2
作者
Fu, Yulei [1 ]
Gong, Ruifeng [1 ,2 ]
Ding, Zhiang [2 ]
Zeng, Zhankui [1 ]
Wei, Guoning [1 ]
Xiao, Yuzhi [1 ]
机构
[1] Shanghai Acad Spaceflight Technol, Shanghai Inst Aerosp Syst Engn, Shanghai 201109, Peoples R China
[2] Beijing Jiaotong Univ, Sch Mech Elect & Control Engn, Beijing 100044, Peoples R China
基金
中国国家自然科学基金; 上海市科技启明星计划;
关键词
Sail surface defects; Atomic oxygen erosion; Deorbit sail; Monte Carlo method; Erosion assessment; SPACE DEBRIS; SYSTEM; ORBIT;
D O I
10.1016/j.actaastro.2023.09.030
中图分类号
V [航空、航天];
学科分类号
08 ; 0825 ;
摘要
In order to help control the spread of space debris and junk, deorbit sail devices have been used for deorbiting techniques; however, this approach is still considered risky due to potential failure or malfunction as it need to be exposed to the harsh space environment for a prolonged period of time, particularly in low-Earth orbit. China has made new strides forward in managing space junk, as it has successfully unfolded a 25-square-meter deorbit sail developed by the Shanghai Academy of Spacecraft Technology in-orbit for the payload capsule of a recently launched rocket. Accordingly in this paper, a full life-cycle modelling based on Monte Carlo method is developed to reveal the damage behavior of the 25-square-meter deorbit sail surface under the combined effects of atomic oxygen erosion and deorbit sail defects. The simulation results show that as the atomic oxygen fluence increases and the material defect width widens, the interaction effect of the two factors becomes more and more pronounced, which decisively influences the erosion rate of the sail surface. Morphological characterization of aluminized film PET material, activated silanisation modified material and plasma-polymerization coating material before and after atomic oxygen erosion combined defects is carried out and the atomic oxygen erosion of the deorbit sail surfaces is quantitatively assessed. The assessment results show that compared to the PET material and activation silanisation surface modification material, the plasma polymeric coated material showed much better flexibility, folding resistance and irradiation resistance to prevent geological fold and to shield from the atomic oxygen erosion in space. The atomic oxygen erosion combined defects assessment method studied in this paper provides valuable reference data for the subsequent serialisation of deorbit sail products and other typical lightweight film materials for space applications.
引用
收藏
页码:741 / 751
页数:11
相关论文
共 38 条
[31]  
spenvis, SPENVIS - Space Environment, Effects, and education system
[32]  
Stohlman O.R., 2014, SPACECRAFT STRUCTURE, P1509
[33]   Assessment of space debris collisions against spacecraft with deorbit devices [J].
Tomizaki, Honoka ;
Kobayashi, Ryohei ;
Suzuki, Mayumi ;
Karasawa, Nanami ;
Hasegawa, Sunao ;
Makihara, Kanjuro .
ADVANCES IN SPACE RESEARCH, 2021, 67 (05) :1526-1534
[34]  
Valdatta M., 2014, 65 INT ASTR C 2 14 I, P1387
[35]   Effects of atomic oxygen irradiation on transparent conductive oxide thin films [J].
Wang Wenwen ;
Wang Tianmin .
CHINESE JOURNAL OF AERONAUTICS, 2007, 20 (05) :464-468
[36]   Dynamic behavior of electrodynamic tether deorbit system on elliptical orbit and its control by Lorentz force [J].
Yamaigiwa, Y ;
Hiragi, E ;
Kishimoto, T .
AEROSPACE SCIENCE AND TECHNOLOGY, 2005, 9 (04) :366-373
[37]   Rocket measurement of electron density and atomic oxygen density modulated by atmospheric gravity waves [J].
Yoshimura, R ;
Iwagami, N ;
Oyama, KI .
MIDDLE ATMOSPHERE STRUCTURE AND DYNAMICS, 2003, 32 (05) :837-842
[38]   Libration dynamics and stability of electrodynamic tethers in satellite deorbit [J].
Zhong, R. ;
Zhu, Z. H. .
CELESTIAL MECHANICS & DYNAMICAL ASTRONOMY, 2013, 116 (03) :279-298