Efficient experimental methods for rapid fatigue life estimation of additive manufactured elements

被引：14

作者：

Colombo, Chiara ^{[1
]}

Tridello, Andrea ^{[2
]}

Pagnoncelli, Ana Paula ^{[2
]}

Biffi, Carlo Alberto ^{[3
]}

Fiocchi, Jacopo ^{[3
]}

Tuissi, Ausonio ^{[3
]}

Vergani, Laura Maria ^{[1
]}

Paolino, Davide Salvatore ^{[2
]}

机构：

[1] Politecn Milan, Dept Mech Engn, Via La Masa 1, I-20156 Milan, Italy

[2] Politecn Torino, Dept Mech & Aerosp Engn, Corso Duca Abruzzi 24, I-10129 Turin, Italy

[3] CNR ICMATE Inst Condensed Matter Chem & Technol En, Via Previati 1-E, I-23900 Lecce, Italy

来源：

INTERNATIONAL JOURNAL OF FATIGUE | 2023年 / 167卷

关键词：

Additive Manufacturing; Infrared Thermography; Ultrasonic fatigue Test; Tomography; Very High Cycle Fatigue; CRACK-GROWTH; LIMIT EVALUATION; ALSI10MG PARTS; STRENGTH; DEFECTS; ALLOYS; DAMAGE; MICROSTRUCTURE; MECHANISMS; ANISOTROPY;

D O I：

10.1016/j.ijfatigue.2022.107345

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Three techniques for the assessment of the fatigue response of AMed parts are compared: defect analysis and subsequent theoretical estimation of the fatigue strength with micro-CT, infrared thermography and ultrasonic fatigue testing. Experimental tests on AlSi10Mg specimens are carried out and proved that each investigated technique can be used for a rapid estimation of the fatigue response. The thermography technique and ultrasonic fatigue tests proved to be effective, evidencing the most critical defects. The fatigue response estimated starting from the defect analysis with micro-CT scans is mainly suggested for the inspection of large components.

引用

页数：15

共 64 条

[11]

CEN European Committee for Standardization, 2021, EUROCODE 9 DESIGN AL

[12] Modulating the damping capacity of SLMed AlSi10Mg trough stress-relieving thermal treatments [J].

Colombo, C. ;

Biffi, C. A. ;

Fiocchi, J. ;

Scaccabarozzi, D. ;

Saggin, B. ;

Tuissi, A. ;

Vergani, L. M. .

THEORETICAL AND APPLIED FRACTURE MECHANICS, 2020, 107

[13] Fatigue damage in GFRP [J].

Colombo, C. ;

Libonati, F. ;

Vergani, L. .

INTERNATIONAL JOURNAL OF STRUCTURAL INTEGRITY, 2012, 3 (04) :424-440

[14] Rapid estimation of fatigue limit for C45 steel by thermography and digital image correlation [J].

Colombo, Chiara ;

Sansone, Mauro ;

Patriarca, Luca ;

Vergani, Laura .

JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 2021, 56 (07) :478-491

[15] Effect of delamination on the fatigue life of GFRP: A thermographic and numerical study [J].

Colombo, Chiara ;

Bhujangrao, Trunal ;

Libonati, Flavia ;

Vergani, Laura .

COMPOSITE STRUCTURES, 2019, 218 :152-161

[16] A new iteration method for the thermographic determination of fatigue limit in steels [J].

Curà, F ;

Curti, G ;

Sesana, R .

INTERNATIONAL JOURNAL OF FATIGUE, 2005, 27 (04) :453-459

[17] Fatigue limit evaluation of various martensitic stainless steels with new robust thermographic data analysis [J].

De Finis, R. ;

Palumbo, D. ;

Ancona, F. ;

Galietti, U. .

INTERNATIONAL JOURNAL OF FATIGUE, 2015, 74 :88-96

[18] Correlation between Thermal Behaviour of AA5754-H111 during Fatigue Loading and Fatigue Strength at Fixed Number of Cycles [J].

De Finis, Rosa ;

Palumbo, Davide ;

Serio, Livia Maria ;

De Filippis, Luigi A. C. ;

Galietti, Umberto .

MATERIALS, 2018, 11 (05)

[19] Rapid characterization of the fatigue limit of additive-manufactured maraging steels using infrared measurements [J].

Douellou, Corentin ;

Balandraud, Xavier ;

Duc, Emmanuel ;

Verquin, Benoit ;

Lefebvre, Fabien ;

Sar, Frederic .

ADDITIVE MANUFACTURING, 2020, 35

[20] Effects of defects on mechanical properties in metal additive manufacturing: A review focusing on X-ray tomography insights [J].

du Plessis, Anton ;

Yadroitsava, Ina ;

Yadroitsev, Igor .

MATERIALS & DESIGN, 2020, 187

← 1 2 3 4 5 6 7 →