Experimental study of off-axis compression behaviour in dynamic loading: The open hole effect

被引：4
作者：
Rodriguez-Sereno, J. M. [1 ]
Pernas-Sanchez, J. [1 ]
Artero-Guerrero, J. A. [1 ]
Lopez-Puente, J. [1 ]
Lukic, B. [2 ]
机构：
[1] Univ Carlos III Madrid, Dept Continuum Mech & Struct Anal, Ave Univ 30, Madrid 28911, Spain
[2] European Synchrotron Radiat Facil, CS40220, F-38043 Grenoble 9, France
来源：
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING | 2023年 / 173卷
基金：
瑞典研究理事会;
关键词：
Strain rate effects; Split Hopkinson pressure bar; Open hole compression; Woven; RATE-DEPENDENT BEHAVIOR; STRAIN RATE BEHAVIOR; FAILURE CRITERIA; WOVEN COMPOSITE; PART I; IMPACT; MODEL; DEFORMATION; STRENGTH; TESTS;
D O I：
10.1016/j.compositesa.2023.107653
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effect of the open hole on the behaviour of carbon fibre reinforced polymer composites (CFRP) under compressive dynamic loading was investigated. To this end, two different set-ups (quasi-static and dynamic) for compression loading were developed. The un-notched plain woven CFRP (AS4 fibres and 8552 matrix) studied in this work was characterized in terms of apparent strength at different off-axis angles at compression loading. The maximum stress criterion was found to be the model which better represents the transverse-shear failure points of the woven composite. Later the effect of the open hole in similar samples were studied, concluding that the hole effect has more impact on the strength for samples with the fibre align with the load. A modification of the Lekhnitskii theory has been proposed in order to take into account the non-linearity of the material and to unveil its role in open hole specimens.
引用
收藏
页数：14
相关论文
共 50 条
  • [41] Strain Rate Dependent Deformation of a Polymer Matrix Composite with Different Microstructures Subjected to Off-Axis Loading
    Zhu, Xiaojun
    Chen, Xuefeng
    Zhai, Zhi
    Yang, Zhibo
    Li, Xiang
    He, Zhengjia
    MATHEMATICAL PROBLEMS IN ENGINEERING, 2014, 2014
  • [42] Experimental Study on Fatigue Behaviour of Shot-Peened Open-Hole Steel Plates
    Wang, Zhi-Yu
    Wang, Qing-Yuan
    Cao, Mengqin
    MATERIALS, 2017, 10 (09):
  • [43] Coupling coefficients of glass/epoxy laminates under off-axis tensile conditions: Experimental verification
    Cai, Deng'an
    Wang, Xiaopei
    Deng, Jian
    Zhou, Guangming
    POLYMER TESTING, 2017, 63 : 334 - 341
  • [44] Experimental & numerical study of the Tensile/Compression-Shear Arcan test under dynamic loading
    Vales, B.
    Marguet, S.
    Creac'hcadec, R.
    Sohier, L.
    Ferrero, J. -F.
    Navarro, P.
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2017, 78 : 135 - 147
  • [45] Simulation of interface damage in metal matrix composites under off-axis loading using cohesive zone model
    Aghdam, M. M.
    Hosseini, S. M. A.
    Morsali, S. R.
    COMPUTATIONAL MATERIALS SCIENCE, 2015, 108 : 42 - 47
  • [46] Effect of off-axis angle on low-velocity impact and compression after impact damage mechanisms of 3D woven composites
    Zhang, Diantang
    Gu, Yuanhui
    Zhang, Zhongwei
    Jia, Minghao
    Yue, Songlin
    Li, Gan
    MATERIALS & DESIGN, 2020, 192
  • [47] Effect of hole reinforcement on the buckling behaviour of thin-walled beams subjected to combined loading
    Orun, Arif E.
    Guler, Mehmet A.
    THIN-WALLED STRUCTURES, 2017, 118 : 12 - 22
  • [48] Determining the effect of voids in GFRP on the damage behaviour under compression loading using acoustic emission
    Kosmann, N.
    Karsten, J. M.
    Schuett, M.
    Schulte, K.
    Fiedler, B.
    COMPOSITES PART B-ENGINEERING, 2015, 70 : 184 - 188
  • [49] Are we crying Wolff? 3D printed replicas of trabecular bone structure demonstrate higher stiffness and strength during off-axis loading
    Wood, Zach
    Lynn, Lisa
    Nguyen, Jack T.
    Black, Margaret A.
    Patel, Meha
    Barak, Meir M.
    BONE, 2019, 127 : 635 - 645
  • [50] An experimental investigation of pre-loading effects on the dynamic behaviour of concrete
    Yan, Dongming
    Liu, Kanghua
    Fan, Lifeng
    Yang, Zhenjun
    MAGAZINE OF CONCRETE RESEARCH, 2017, 69 (11) : 586 - 594
12345