Experimental study of off-axis compression behaviour in dynamic loading: The open hole effect

被引：4
作者：
Rodriguez-Sereno, J. M. [1 ]
Pernas-Sanchez, J. [1 ]
Artero-Guerrero, J. A. [1 ]
Lopez-Puente, J. [1 ]
Lukic, B. [2 ]
机构：
[1] Univ Carlos III Madrid, Dept Continuum Mech & Struct Anal, Ave Univ 30, Madrid 28911, Spain
[2] European Synchrotron Radiat Facil, CS40220, F-38043 Grenoble 9, France
来源：
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING | 2023年 / 173卷
基金：
瑞典研究理事会;
关键词：
Strain rate effects; Split Hopkinson pressure bar; Open hole compression; Woven; RATE-DEPENDENT BEHAVIOR; STRAIN RATE BEHAVIOR; FAILURE CRITERIA; WOVEN COMPOSITE; PART I; IMPACT; MODEL; DEFORMATION; STRENGTH; TESTS;
D O I：
10.1016/j.compositesa.2023.107653
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effect of the open hole on the behaviour of carbon fibre reinforced polymer composites (CFRP) under compressive dynamic loading was investigated. To this end, two different set-ups (quasi-static and dynamic) for compression loading were developed. The un-notched plain woven CFRP (AS4 fibres and 8552 matrix) studied in this work was characterized in terms of apparent strength at different off-axis angles at compression loading. The maximum stress criterion was found to be the model which better represents the transverse-shear failure points of the woven composite. Later the effect of the open hole in similar samples were studied, concluding that the hole effect has more impact on the strength for samples with the fibre align with the load. A modification of the Lekhnitskii theory has been proposed in order to take into account the non-linearity of the material and to unveil its role in open hole specimens.
引用
收藏
页数：14
相关论文
共 50 条
  • [31] Effect of multiaxiality, stacking sequence and number of off-axis layers on the mechanical response and damage sequence of carbon/epoxy composite laminates under static loading
    Kalteremidou, Kalliopi-Artemi
    Hajikazemi, Mohammad
    Van Paepegem, Wim
    Van Hemelrijck, Danny
    Pyl, Lincy
    COMPOSITES SCIENCE AND TECHNOLOGY, 2020, 190
  • [32] Experimental and numerical study on progressive damage and failure in composite laminates during open-hole compression tests
    Higuchi, R.
    Warabi, S.
    Yoshimura, A.
    Nagashima, T.
    Yokozeki, T.
    Okabe, T.
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2021, 145
  • [33] Analysis of the effect of a stress raiser on the strength of a UD flax/epoxy composite in off-axis tension
    Modniks, J.
    Sparnins, E.
    Andersons, J.
    Becker, W.
    JOURNAL OF COMPOSITE MATERIALS, 2015, 49 (09) : 1071 - 1080
  • [34] Mechanical behavior of unidirectional SiC/Ti composites subjected to off-axis loading at elevated temperatures
    Aghdam, M. M.
    Morsali, S. R.
    Hosseini, S. M. A.
    Sadighi, M.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 688 : 244 - 249
  • [35] Experimental and Numerical Study on Stress Relaxation of Sandstones Disturbed by Dynamic Loading
    Zhu, Wancheng
    Li, Shuai
    Niu, Leilei
    Liu, Kai
    Xu, Tao
    ROCK MECHANICS AND ROCK ENGINEERING, 2016, 49 (10) : 3963 - 3982
  • [36] A comparison of open-hole compression fixtures by experimental evaluation
    Coguill, SL
    Adams, DF
    BRIDGING THE CENTURIES WITH SAMPE'S MATERIALS AND PROCESSES TECHNOLOGY, VOL 45, BOOKS 1 AND 2, 2000, : 1095 - 1105
  • [37] Experimental Study on the Mechanical Behavior of Coal under Triaxial Dynamic Compression
    Cheng, Chunhui
    Xue, Sheng
    Han, Yidan
    MINERALS, 2022, 12 (10)
  • [38] Effect of strain rate, off-axis loading and high-velocity impact damage on the compressive strength of C/SiC composite
    Altaf, M.
    Singh, S.
    Prasad, V. V. Bhanu
    Patel, Manish
    JOURNAL OF COMPOSITE MATERIALS, 2019, 53 (04) : 535 - 546
  • [39] Off-axis notched strength of fiber-metal laminates and a formula for predicting anisotropic size effect
    Kawai, M.
    Arai, Y.
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2009, 40 (12) : 1900 - 1910
  • [40] MECHANICAL BEHAVIOUR OF BULK RAPESEEDS UNDER QUASI DYNAMIC COMPRESSION LOADING
    Herak, David
    Sleger, Vladimir
    Mizera, Cestmir
    Sedlacek, Ales
    14TH INTERNATIONAL SCIENTIFIC CONFERENCE: ENGINEERING FOR RURAL DEVELOPMENT, 2015, : 28 - 32
12345